Do you want this big green box to go away? Well here's how...

Click here for full update

Wildcat! photo archives restored.

Click here for full update

Donors can now disable ads.

Click here for instructions

Add yourself to the user map.

Click here for instructions

wheel alignment

Converted from Wildcat! database. (read only)
Locked
Ralph Baker

wheel alignment

Post by Ralph Baker » Sun Feb 19, 2012 10:39 am

The new Vans catalog also lists whel alignment wedges in 1/2 and 1 degree adjustment. Have not yet confirmed that the bolt patterns are same as MAM.
Rallph Baker



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike Kimball

Wheel alignment

Post by Mike Kimball » Sun Feb 19, 2012 10:59 am

I went through the archives and discovered the toe out versus toe in
controversy and also the frequent comment about setting them straight ahead
and leave it at that. I measured the distance between my tires at the front
and at the back and the front measurement is one centimeter less than the
back. So I have a slight toe in. I'm inclined to just leave it that way.
I figure it would only be bad if one was straight and the other accounted
for the entire toe in. Any tips for making sure that isn't the case?

Mike
044SR





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Locked