[rebel-builders] Carting a moose home from the trucking dock
Posted: Sun Feb 19, 2012 10:35 am
Thanks for the help Wayne, Dale and Drew,
I was thinking that it would be too much tilt for the parts instide the
crate, but heck, if it made it across the rocky mountains then I guess
it could handle one last minor incline.
Thanks,
Fred
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Thursday, March 30, 2006 12:09 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Carting a moose home from the trucking
docks
Every town has a towing company with a roll off deck "tow" truck. Backs
up to the shipping facility..they shove the crate on with the fork
truck.....drives to your place you tell him where you want it and he
drops/tilts the bed so it slides off. Have a few pieces of 1.5 to 3 inch
ABS pipe ready and put them under as it comes off the truck. Then roll
the crate to final destination by circulating tubes out the back and
back to the front as you go. This method works very well for having
milling machines and lathes delivered too. Just substitute 1" steel
shaft for the rolling material.
Wayne
----- Original Message -----
From: "Fred Messinger (fredm)" <fredm@cisco.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, March 30, 2006 10:24 AM
Subject: RE: [rebel-builders] Carting a moose home from the trucking
docks
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I was thinking that it would be too much tilt for the parts instide the
crate, but heck, if it made it across the rocky mountains then I guess
it could handle one last minor incline.
Thanks,
Fred
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Wayne G. O'Shea
Sent: Thursday, March 30, 2006 12:09 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Carting a moose home from the trucking
docks
Every town has a towing company with a roll off deck "tow" truck. Backs
up to the shipping facility..they shove the crate on with the fork
truck.....drives to your place you tell him where you want it and he
drops/tilts the bed so it slides off. Have a few pieces of 1.5 to 3 inch
ABS pipe ready and put them under as it comes off the truck. Then roll
the crate to final destination by circulating tubes out the back and
back to the front as you go. This method works very well for having
milling machines and lathes delivered too. Just substitute 1" steel
shaft for the rolling material.
Wayne
----- Original Message -----
From: "Fred Messinger (fredm)" <fredm@cisco.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, March 30, 2006 10:24 AM
Subject: RE: [rebel-builders] Carting a moose home from the trucking
docks
Hi Dale,
Where did you buy yours from? There seems to be a shortage in the
northeast....according to NationsRent. If I know where you bought
yours from maybe I can call them for some leads.
Thanks for your help,
Fred
-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of
Dale Fultz
Sent: Tuesday, March 28, 2006 12:47 PM
To: rebel-builders@dcsol.com
Subject: Re: [rebel-builders] Carting a moose home from the trucking
docks
Get a local guy with a roll-back to haul it will be a lot easier to
handle when you get to where you are goin to work on it. If it weren't
"rebel"so far I would do it for you. Dale SR-033
----- Original Message -----
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login username
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login username
"rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login username "rebel"
password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------