The Murphy Builders Site

While floats aren't on my present agenda Wayne, due largely to the shortage
of water in this part of the world, I could well be interested in a copy for
possible future reference.

Bill
753R
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Sent: Wednesday, March 29, 2006 1:40 PM
Subject: [rebel-builders] 1800 Amphib Float building pictorial manual

Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we
have
an approximate number we can determine if we'll bother and set a price.
Most
likely be done in a slide show presentation so it can be copy
protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dear Wayne,

I'm interested too.

Jeffrey




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I'd like a copy.

John...


At 09:40 PM 03/28/06, you wrote:

Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we have
an approximate number we can determine if we'll bother and set a price. Most
likely be done in a slide show presentation so it can be copy protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Add me in Wayne !

Nig

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: 29 March 2006 04:41
To: Murphy Rebel Builders List
Subject: [rebel-builders] 1800 Amphib Float building pictorial manual


Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we have
an approximate number we can determine if we'll bother and set a price. Most
likely be done in a slide show presentation so it can be copy protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I'm interested Wayne.

Terry

-- "Wayne G. O'Shea" <oifa@irishfield.on.ca> wrote:
Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we have
an approximate number we can determine if we'll bother and set a price. Most
likely be done in a slide show presentation so it can be copy protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hello Wayne,

Put my name on the list!

Jean
Rebel 747R
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Sent: Tuesday, March 28, 2006 10:40 PM
Subject: [rebel-builders] 1800 Amphib Float building pictorial manual

Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we
have
an approximate number we can determine if we'll bother and set a price.
Most
likely be done in a slide show presentation so it can be copy
protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Wayne
I would be interested too
Dale



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne,

Add me to the list.

Keith R661



__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

That's a great idea! I will take one for sure. You should do the same thing
for the airplane. Make the definitive illustrated construction manual. Maybe
make a few bucks for all your knowledge.
Jesse

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Subject: [rebel-builders] 1800 Amphib Float building pictorial manual
Date: Tue, 28 Mar 2006 22:40:45 -0500

Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we
have
an approximate number we can determine if we'll bother and set a price.
Most
likely be done in a slide show presentation so it can be copy protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

and another MEE TOOO ....

Dieter Oberbichler
778R
long way to go...
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Sent: Wednesday, March 29, 2006 5:40 AM
Subject: [rebel-builders] 1800 Amphib Float building pictorial manual

Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we
have
an approximate number we can determine if we'll bother and set a price.
Most
likely be done in a slide show presentation so it can be copy
protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne I would like to get these cd's also. I think it would be of great
help.Thanks Dave T Rebel #009

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Subject: [rebel-builders] 1800 Amphib Float building pictorial manual
Date: Tue, 28 Mar 2006 22:40:45 -0500

Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we
have
an approximate number we can determine if we'll bother and set a price.
Most
likely be done in a slide show presentation so it can be copy protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I hear yah Jean and fully intend to "take a good profit". Wont' be used for
SnF though...towards three kids University bills !

Before too many more throw up their hand and say "me too Wayne" take note
that as I posted it will be for sale...not given away for a couple bucks.
The 13+ years of building experience, and the over a 1/3rd of a million
rivets I've personally pulled, that goes along with the ablity to do the
photo library definitely has a price and for once I'm gonna charge for my
"advise" and pictures. No set amount yet....but I have had it suggested by
people that know the expense of even doing the written manuals that I should
be charging at least a couple hundred dollars for these CD's. Don't think
it'll be that high, but definitely not going to be any cheaper than a GOOD
reference book or it's pointless to proceed on our part (ie: I know how to
build them already...this isn't the first set.... and I don't need a CD!).

Cheers,
Wayne

----- Original Message -----
From: "Jean Poirier" <jean.poirier@oxyportneuf.com>
To: "rebel builder" <rebel-builders@dcsol.com>
Sent: Wednesday, March 29, 2006 8:25 AM
Subject: [rebel-builders] Wayne cd...

Hey Wayne,

I have a fantastic idea! Take a good profit on the cd. Put all the

profit out of "shopping hands" for the next year, do not take too much work
for next spring and than you will not have any reasons to not come at the
Sun'Fun!

Jean
Rebel 747R



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Count us in Wayne.
Paul & Peg Michel

From: "Jesse Jenks" <jessejenks@hotmail.com>
Date: 2006/03/29 Wed AM 11:12:37 EST
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] 1800 Amphib Float building pictorial manual

That's a great idea! I will take one for sure. You should do the same thing
for the airplane. Make the definitive illustrated construction manual. Maybe
make a few bucks for all your knowledge.
Jesse

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Subject: [rebel-builders] 1800 Amphib Float building pictorial manual
Date: Tue, 28 Mar 2006 22:40:45 -0500

Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we
have
an approximate number we can determine if we'll bother and set a price.
Most
likely be done in a slide show presentation so it can be copy protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi wayne
My rebel wont be on floats but like Jesse, I would sure buy into a pictorial
build manual for the airplane itself.
Brian
----- Original Message -----
From: <micreb@bellsouth.net>
To: <rebel-builders@dcsol.com>
Sent: Thursday, March 30, 2006 6:21 PM
Subject: Re: RE: [rebel-builders] 1800 Amphib Float building pictorial
manual

Count us in Wayne.
Paul & Peg Michel

From: "Jesse Jenks" <jessejenks@hotmail.com>
Date: 2006/03/29 Wed AM 11:12:37 EST
To: rebel-builders@dcsol.com
Subject: RE: [rebel-builders] 1800 Amphib Float building pictorial manual

That's a great idea! I will take one for sure. You should do the same
thing
for the airplane. Make the definitive illustrated construction manual.
Maybe
make a few bucks for all your knowledge.
Jesse

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: "Murphy Rebel Builders List" <rebel-builders@dcsol.com>
Subject: [rebel-builders] 1800 Amphib Float building pictorial manual
Date: Tue, 28 Mar 2006 22:40:45 -0500

Just a post to see if there is a sufficient number of people that would
be
interested in buying a photo library of how to build the 1800 amphibs.
I'm
currently well beyond 300 in process pictures, with paper
notes/dimensions
or writing directly on the parts in the pictures where required to
correct
manual errors or building tips to speed/improve construction (such as
the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there
will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations
of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we
have
an approximate number we can determine if we'll bother and set a price.
Most
likely be done in a slide show presentation so it can be copy
protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Wayne
Absoutely yes without a second thought up to about $100.
Probably well worth a lot more but I might resist at $200...
Then I'd probably get into the manual and realize that "resistance is
futile". ;)
Ken

Wayne G. O'Shea wrote:

Just a post to see if there is a sufficient number of people that would be
interested in buying a photo library of how to build the 1800 amphibs. I'm
currently well beyond 300 in process pictures, with paper notes/dimensions
or writing directly on the parts in the pictures where required to correct
manual errors or building tips to speed/improve construction (such as the
picture I linked on how to align/square the main gear mechanism a while
back). I figure based on where I am and where I have to get to there will
probably be 500 to 600 pictures by the time this set makes it onto the
airplane. Will also add installation pictures of various installations of
1800's as well.

Just seeing if there is enough interest for such a CD and if so once we have
an approximate number we can determine if we'll bother and set a price. Most
likely be done in a slide show presentation so it can be copy protected....
as we're not going to go to the trouble only to have it boot legged.

Cheers,
Wayne

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------