Page 1 of 1
ground handling handles
Posted: Sun Feb 19, 2012 10:35 am
by Ralph Baker
Mine came from MAM. They were originally designed and sold by Keith at Montana floats but I think only available now from MAM.
Ralph Baker
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
ground handling handles
Posted: Sun Feb 19, 2012 10:35 am
by Ralph Baker
One comes out each side for double the handling pleasure. I don't know what MAM is getting for them now, they may be on the web site. (Nancy's doing a good job uprating it!) Seems like over US$200 some years ago. It would be possible to add a through tube and a separate removable through handle but the fuselage area would have to be reinforced to take the load. I don't want to have any more loose items to contend with. Remember, these are not just for hangar use but also for those one way in / out runways.
Regards,
Ralph Baker
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
Ground handling handles
Posted: Sun Feb 19, 2012 5:12 pm
by Simon Smith
If anyone would like some pictures and information on my Rebel handles feel free to e-mail me.
Si
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
Ground handling handles
Posted: Sun Feb 19, 2012 5:12 pm
by Simon Smith
Charlie,
A little less than a pound with 2 handles and no plastic or rubber grips. The doublers are .050 6061-T6, the fuselage tube is 1" X .049 6061-T6, and the handles are 7/8" X .049 6061-T6 I hope this helps.
Si 555R & 572R
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------