Page 1 of 1

[rebel-builders] Rebel Elevator

Posted: Sun Feb 19, 2012 10:26 am
by Ken
No one has ever reported a need to do the rudder apparently because
there are no lead counter-weights in the rudder tip.
Ken

Brian Breathnach wrote:
Ahoy all!

Just finished the elevator mod to prevent skin flexing/cracking at the outer end of the spar as per the photos in the archives.

Question. Is there a valid reason, or need, to apply the same mod to the Rudder Horn? Or is it a waste of time to do it because there is no lead weight in that horn?

Thanx all

Brian R779




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Rebel Elevator

Posted: Sun Feb 19, 2012 10:26 am
by Jones, Michael
brian

rudder does not need mod, elevators have weights in tips so have more forces
on them, leave rudder alone its okay so far

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Brian Breathnach
Sent: Wednesday, February 22, 2006 11:57 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Rebel Elevator


Ahoy all!

Just finished the elevator mod to prevent skin flexing/cracking at the outer
end of the spar as per the photos in the archives.

Question. Is there a valid reason, or need, to apply the same mod to the
Rudder Horn? Or is it a waste of time to do it because there is no lead
weight in that horn?

Thanx all

Brian R779



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Rebel Elevator

Posted: Sun Feb 19, 2012 10:26 am
by Brian Breathnach
Thank you Ken
Brian
----- Original Message -----
From: "Ken" <klehman@albedo.net>
To: <rebel-builders@dcsol.com>
Sent: Friday, February 24, 2006 4:37 AM
Subject: Re: [rebel-builders] Rebel Elevator

No one has ever reported a need to do the rudder apparently because
there are no lead counter-weights in the rudder tip.
Ken

Brian Breathnach wrote:
Ahoy all!

Just finished the elevator mod to prevent skin flexing/cracking at the
outer end of the spar as per the photos in the archives.

Question. Is there a valid reason, or need, to apply the same mod to the
Rudder Horn? Or is it a waste of time to do it because there is no lead
weight in that horn?

Thanx all

Brian R779




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[rebel-builders] Rebel Elevator

Posted: Sun Feb 19, 2012 10:26 am
by Brian Breathnach
Excellent Mike
THanx for the input
Brian R779
----- Original Message -----
From: "Jones, Michael" <Michael.Jones@snclavalin.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, February 24, 2006 4:17 AM
Subject: RE: [rebel-builders] Rebel Elevator

brian

rudder does not need mod, elevators have weights in tips so have more
forces
on them, leave rudder alone its okay so far

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Brian Breathnach
Sent: Wednesday, February 22, 2006 11:57 PM
To: rebel-builders@dcsol.com
Subject: [rebel-builders] Rebel Elevator


Ahoy all!

Just finished the elevator mod to prevent skin flexing/cracking at the
outer
end of the spar as per the photos in the archives.

Question. Is there a valid reason, or need, to apply the same mod to the
Rudder Horn? Or is it a waste of time to do it because there is no lead
weight in that horn?

Thanx all

Brian R779



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------