The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

Air Riveter Requirements

https://www.murphybuilders.net/viewtopic.php?f=1&t=593

Page 1 of 1

Air Riveter Requirements

Posted: Fri Feb 17, 2012 5:39 pm
by randy (psi)
Hello I have just purchased the tail section of a rebel and I am waiting for
delivery. In the meantime I am getting my work space and tools in order. I
have a compressor and plan on using the pneumatic air riveter that comes
with the Murphy Tool Kit. Can anyone tell me what the air requirements are
for the riveter I want to insure that the compressor that I got for
Christmas is large enough. (5HP, 25 gallon, 8.2 CFM@40PSI, 5.6CFM@90PSI)

Thanks

Randy

-----Original Message-----
From: list-server <list-server@dcsol.com>
To: randy@w5.net <randy@w5.net>
Date: Wednesday, December 29, 1999 12:01 AM
Subject: murphy-rebel Digest for 28 Dec 1999

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*
murphy-rebel Digest for 28 Dec 1999

Topics covered in this issue include:

1: Aileron Deflection
by "Alister Yeoman" <yeoman@voyager.co.nz>



--------------------------------------------------------------------------
1 Message:0001 1
--------------------------------------------------------------------------
From: "Alister Yeoman" <yeoman@voyager.co.nz>
To: "Rebel" <murphy-rebel@dcsol.com>
Subject: Aileron Deflection

This is a multi-part message in MIME format.

------=_NextPart_000_0039_01BF517E.43A9E4C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hi There,
A Rebel builder out here has just asked me what final =
measurements I used to set up the ailerons, I can't find the relevant =
piece of paper!

Has anyone out there got the answer? i.e. with neutral flaperon, how =
many inches deflection up and down do you set your ailerons at?

If you have the answer it would be much appreciated.

Cheers

Alister =20


email: yeoman@voyager.co.nz

------=_NextPart_000_0039_01BF517E.43A9E4C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>

<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000000 size=3D2>Hi There,</FONT></DIV>
<DIV><FONT color=3D#000000=20
size=3D2>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;=20
A&nbsp; Rebel builder out here has just asked me what final measurements =
I used=20
to set up the ailerons, I can't find the relevant piece of =
paper!</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Has anyone out there got the answer? =
i.e. with=20
neutral flaperon, how many inches deflection up and down do you set your =

ailerons at?</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>If you have the answer it would be =
much=20
appreciated.</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Cheers</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Alister&nbsp;&nbsp;&nbsp; =
</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>email: <A=20
href=3D"mailto:yeoman@voyager.co.n">yeoman@voyager.co.n</A>z</FONT></DIV>=
</BODY></HTML>

------=_NextPart_000_0039_01BF517E.43A9E4C0--

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Air Riveter Requirements

Posted: Fri Feb 17, 2012 5:39 pm
by Wray Thompson
Randy your compressor sounds about the same size as mine and I've never had a
problem yet even with the big SS Rivets. ...Wray

"randy (psi)" wrote:
Hello I have just purchased the tail section of a rebel and I am waiting for
delivery. In the meantime I am getting my work space and tools in order. I
have a compressor and plan on using the pneumatic air riveter that comes
with the Murphy Tool Kit. Can anyone tell me what the air requirements are
for the riveter I want to insure that the compressor that I got for
Christmas is large enough. (5HP, 25 gallon, 8.2 CFM@40PSI, 5.6CFM@90PSI)

Thanks

Randy
--
Wray Thompson ...Rebel 306 ...home page http://www.globalserve.net/~cobbg/


*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Air Riveter Requirements

Posted: Fri Feb 17, 2012 5:39 pm
by Lonnie Benson
Randy; that compressor will do the job.

Lonnie

-----Original Message-----
From: randy (psi) <randy@w5.net>
To: Murphy Rebel Builders List <murphy-rebel@dcsol.com>
Date: Wednesday, December 29, 1999 9:36 AM
Subject: Re: Air Riveter Requirements

Hello I have just purchased the tail section of a rebel and I am waiting
for
delivery. In the meantime I am getting my work space and tools in order.
I
have a compressor and plan on using the pneumatic air riveter that comes
with the Murphy Tool Kit. Can anyone tell me what the air requirements are
for the riveter I want to insure that the compressor that I got for
Christmas is large enough. (5HP, 25 gallon, 8.2 CFM@40PSI, 5.6CFM@90PSI)

Thanks

Randy

-----Original Message-----
From: list-server <list-server@dcsol.com>
To: randy@w5.net <randy@w5.net>
Date: Wednesday, December 29, 1999 12:01 AM
Subject: murphy-rebel Digest for 28 Dec 1999

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*
murphy-rebel Digest for 28 Dec 1999

Topics covered in this issue include:

1: Aileron Deflection
by "Alister Yeoman" <yeoman@voyager.co.nz>



--------------------------------------------------------------------------
1 Message:0001 1
--------------------------------------------------------------------------
From: "Alister Yeoman" <yeoman@voyager.co.nz>
To: "Rebel" <murphy-rebel@dcsol.com>
Subject: Aileron Deflection

This is a multi-part message in MIME format.

------=_NextPart_000_0039_01BF517E.43A9E4C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hi There,
A Rebel builder out here has just asked me what final =
measurements I used to set up the ailerons, I can't find the relevant =
piece of paper!

Has anyone out there got the answer? i.e. with neutral flaperon, how =
many inches deflection up and down do you set your ailerons at?

If you have the answer it would be much appreciated.

Cheers

Alister =20


email: yeoman@voyager.co.nz

------=_NextPart_000_0039_01BF517E.43A9E4C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>

<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000000 size=3D2>Hi There,</FONT></DIV>
<DIV><FONT color=3D#000000=20
size=3D2>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;=20
A&nbsp; Rebel builder out here has just asked me what final measurements =
I used=20
to set up the ailerons, I can't find the relevant piece of =
paper!</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Has anyone out there got the answer? =
i.e. with=20
neutral flaperon, how many inches deflection up and down do you set your =

ailerons at?</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>If you have the answer it would be =
much=20
appreciated.</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Cheers</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Alister&nbsp;&nbsp;&nbsp; =
</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>email: <A=20
href=3D"mailto:yeoman@voyager.co.n">yeoman@voyager.co.n</A>z</FONT></DIV>=
</BODY></HTML>

------=_NextPart_000_0039_01BF517E.43A9E4C0--

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*
*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Air Riveter Requirements

Posted: Fri Feb 17, 2012 5:39 pm
by Brian Cross
Hi There

Concerning your compressor size, my unit is only 2.5 HP and it only comes on
about every 10 minutes when you are riveting at full speed i.e. a wing.

Welcome to Rebel building. It's a great way to use up all your spare time
for 5 or so years!

Enjoy yourself and keep the questions coming. There are some great builders
etc. on line who can help you a great deal.

Best Regards


Brian #328R


-----Original Message-----
From: randy (psi) [mailto:randy@w5.net]
Sent: Wednesday, December 29, 1999 9:33 AM
To: Murphy Rebel Builders List
Subject: Re: Air Riveter Requirements


Hello I have just purchased the tail section of a rebel and I am waiting for
delivery. In the meantime I am getting my work space and tools in order. I
have a compressor and plan on using the pneumatic air riveter that comes
with the Murphy Tool Kit. Can anyone tell me what the air requirements are
for the riveter I want to insure that the compressor that I got for
Christmas is large enough. (5HP, 25 gallon, 8.2 CFM@40PSI, 5.6CFM@90PSI)

Thanks

Randy

-----Original Message-----
From: list-server <list-server@dcsol.com>
To: randy@w5.net <randy@w5.net>
Date: Wednesday, December 29, 1999 12:01 AM
Subject: murphy-rebel Digest for 28 Dec 1999

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*
murphy-rebel Digest for 28 Dec 1999

Topics covered in this issue include:

1: Aileron Deflection
by "Alister Yeoman" <yeoman@voyager.co.nz>



--------------------------------------------------------------------------
1 Message:0001 1
--------------------------------------------------------------------------
From: "Alister Yeoman" <yeoman@voyager.co.nz>
To: "Rebel" <murphy-rebel@dcsol.com>
Subject: Aileron Deflection

This is a multi-part message in MIME format.

------=_NextPart_000_0039_01BF517E.43A9E4C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

Hi There,
A Rebel builder out here has just asked me what final =
measurements I used to set up the ailerons, I can't find the relevant =
piece of paper!

Has anyone out there got the answer? i.e. with neutral flaperon, how =
many inches deflection up and down do you set your ailerons at?

If you have the answer it would be much appreciated.

Cheers

Alister =20


email: yeoman@voyager.co.nz

------=_NextPart_000_0039_01BF517E.43A9E4C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>

<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type>
<META content=3D'"MSHTML 4.72.3110.7"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#000000 size=3D2>Hi There,</FONT></DIV>
<DIV><FONT color=3D#000000=20
size=3D2>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;=20
A&nbsp; Rebel builder out here has just asked me what final measurements =
I used=20
to set up the ailerons, I can't find the relevant piece of =
paper!</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Has anyone out there got the answer? =
i.e. with=20
neutral flaperon, how many inches deflection up and down do you set your =

ailerons at?</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>If you have the answer it would be =
much=20
appreciated.</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Cheers</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>Alister&nbsp;&nbsp;&nbsp; =
</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2>email: <A=20
href=3D"mailto:yeoman@voyager.co.n">yeoman@voyager.co.n</A>z</FONT></DIV>=
</BODY></HTML>

------=_NextPart_000_0039_01BF517E.43A9E4C0--

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
All times are UTC-09:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/