Rebel throttle / mixture controls
Posted: Sat Feb 18, 2012 2:53 pm
Steve,
I'm going to order mine from Van's as that is my surest way to get a housing fitting that will match the existing throttle cable hole in the carb mounting plate. I have not finalized the measurements yet. Do give some thought as to how you will fix (clamp) the cable sheath.
Ralph Baker
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I'm going to order mine from Van's as that is my surest way to get a housing fitting that will match the existing throttle cable hole in the carb mounting plate. I have not finalized the measurements yet. Do give some thought as to how you will fix (clamp) the cable sheath.
Ralph Baker
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------