The Murphy Builders Site

Hello All,
Working on the rudder now, came upon a few questions. Perhaps someone would
be kind enough to clarify.
In the manual it says to dimple the skin and top rib, saying to disassemble and
deburr all parts afterwards.
My questions are;
1)-Is it not preferable to deburr the holes before dimpling?
2)-Should I dimple the skin and rib together in one action, or dimple the rib and skin
separately (two actions)?
Thanks in advance.
J. Alan Thompson



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

alan

yes deburr holes first then dimple
es dimple parts together but not that important if you ensure dies are
centered correctly

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
alan.thompson@dcsol.com
Sent: Monday, January 23, 2006 2:26 PM
To: rebel-builders@dcsol.com
Subject: Dimpling top rudder rib


Hello All,
Working on the rudder now, came upon a few questions. Perhaps someone would

be kind enough to clarify.
In the manual it says to dimple the skin and top rib, saying to disassemble
and
deburr all parts afterwards.
My questions are;
1)-Is it not preferable to deburr the holes before dimpling?
2)-Should I dimple the skin and rib together in one action, or dimple the
rib and skin
separately (two actions)?
Thanks in advance.
J. Alan Thompson



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I agree with both of Mike's responses. If you are using the simple nail and
two dies dimpler that I use the key to properly centered dies is the right
size nail. One that's even a little bit too small will cause the dimples to
wander a bit.

Mike

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jones,
Michael
Sent: Monday, January 23, 2006 10:31 AM
To: 'rebel-builders@dcsol.com'
Subject: RE: Dimpling top rudder rib

alan

yes deburr holes first then dimple
es dimple parts together but not that important if you ensure dies are
centered correctly

mike#007

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
alan.thompson@dcsol.com
Sent: Monday, January 23, 2006 2:26 PM
To: rebel-builders@dcsol.com
Subject: Dimpling top rudder rib


Hello All,
Working on the rudder now, came upon a few questions. Perhaps someone would

be kind enough to clarify.
In the manual it says to dimple the skin and top rib, saying to disassemble
and
deburr all parts afterwards.
My questions are;
1)-Is it not preferable to deburr the holes before dimpling?
2)-Should I dimple the skin and rib together in one action, or dimple the
rib and skin
separately (two actions)?
Thanks in advance.
J. Alan Thompson



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------