baggage floor
Posted: Sat Feb 18, 2012 2:45 pm
Gentlemen
The hat is 1" high over the cables.
Get 1" styrofoam, cut to fit each side of hat over to corner wrap, glue on a piece of 1/8" plywood, carpet the plywood and you have a flat floor. Make it in 2 pieces so you can get it out if need be. This works great.Doesn't weigh to much either.
Good luck
Murray
Rebel 505
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
The hat is 1" high over the cables.
Get 1" styrofoam, cut to fit each side of hat over to corner wrap, glue on a piece of 1/8" plywood, carpet the plywood and you have a flat floor. Make it in 2 pieces so you can get it out if need be. This works great.Doesn't weigh to much either.
Good luck
Murray
Rebel 505
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------