Corner Wraps Rebel another use for Fus 10's
Posted: Sat Feb 18, 2012 2:22 pm
Made a cute but small fairing out of an unused Fus 10 for the front of the
vertical stab. Comes out about 71/2 " high and 26" long. Made a tapered
channel to fit on the top of the tail in front of the stab and another for
the inside to give it a bit of reinforcement. Rolled the fus 10 over a
piece of 1/2 " steel rod.
Steve W.
Rebel 637
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
vertical stab. Comes out about 71/2 " high and 26" long. Made a tapered
channel to fit on the top of the tail in front of the stab and another for
the inside to give it a bit of reinforcement. Rolled the fus 10 over a
piece of 1/2 " steel rod.
Steve W.
Rebel 637
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------