Page 1 of 1

Corner Wraps Rebel

Posted: Sat Feb 18, 2012 2:22 pm
by steve whitenect
From: Jim Cole <jcole@rangroup.com>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Corner Wraps
Date: Tue, 15 Nov 2005 09:52:35 -0500

Thanks Angus, Bob had also mentioned on Sunday to put some support
behind Fus 26 which is the panel below the door. One of the Ontario Mods
is to make that panel out of .032 which I have done and now I'll add a
couple of supports.
Cheers
Jim
Rebel 333

Angus McKenzie wrote:
Hi Jim
Several years ago I redid all the corner wraps and the belly to .032 plus
much more internal witch's-hat stiffening. John and I made these
components
ourselves.

I am finding some rivets smoking under the door frame, not sure of the
panel
numbers but right under the sill were it begins to angle upward. The
rivet
line of concern is vertical and it seems to be were the loading is
focused
between the fore and aft float mount fittings.

More stuff to do--a homebuilt is never finished.
..............Angus



----- Original Message -----
From: "Jim Cole" <jcole@rangroup.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, November 14, 2005 3:05 PM
Subject: Re: Corner Wraps



Angus were your corner wraps the original .20 Fus10 or the newer .32
Fus 70???

We had a smaller turnout than normal yesterday in Brampton but still a
valuable and lively discussion.
I was also able to take a couple of pictures of two different Rebels to
solve my firewall placement questions.
Thanks again to Bob and Anna.

Jim
Rebel 333



Angus McKenzie wrote:


now
calipers
pressure
hot
W&B
aluminum
issues.
They
I
instalation.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





--
Internal Virus Database is out-of-date.
Checked by AVG Anti-Virus.
Version: 7.0.289 / Virus Database: 265.0.0 - Release Date: 11/8/2004





Hi Guys
Aren't the fus-70's .025 and the fus-452 .032? Careful what u order.

Steve W
Rebel 637

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Corner Wraps Rebel

Posted: Sat Feb 18, 2012 2:22 pm
by steve whitenect
Sorry about that. I shud have cleaned up the message before sending it. It
had a long tail before it got to what I sent.

From: "steve whitenect" <srwhitenect@hotmail.com>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Corner Wraps Rebel
Date: Tue, 15 Nov 2005 16:29:33 +0000
Hi Guys
Aren't the fus-70's .025 and the fus-452 .032? Careful what u order.

Steve W
Rebel 637
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Corner Wraps Rebel

Posted: Sat Feb 18, 2012 2:22 pm
by Wayne G. O'Shea
Yes Fus-10 = .020 Fus-70 = .025 Fus-452 = .032


----- Original Message -----
From: "steve whitenect" <srwhitenect@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Tuesday, November 15, 2005 11:35 AM
Subject: Re: Corner Wraps Rebel

Sorry about that. I shud have cleaned up the message before sending it.
It
had a long tail before it got to what I sent.

From: "steve whitenect" <srwhitenect@hotmail.com>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Corner Wraps Rebel
Date: Tue, 15 Nov 2005 16:29:33 +0000
Hi Guys
Aren't the fus-70's .025 and the fus-452 .032? Careful what u order.

Steve W
Rebel 637
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Corner Wraps Rebel

Posted: Sat Feb 18, 2012 2:22 pm
by Jim Cole
You're right Steve the Fus 70's are .025 - my mistake.

Jim
Rebel 333

steve whitenect wrote:
Sorry about that. I shud have cleaned up the message before sending it. It
had a long tail before it got to what I sent.







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------