The Murphy Builders Site

Posted: **Sat Feb 18, 2012 1:38 pm**

Since I have to wait to close my wing I have time to try to find some of the
special Crown lube for the torque tube. I called the local industrial
supplier and asked if they have Crown #68034. They said they only have 8034.
Is that the same? Any known source for it? I'm not sure if I really need it
anyway. The torque tube only has a bit of friction, but I'm sure it all adds
up.
Jesse

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sat Feb 18, 2012 1:38 pm**

I'll got out and look at a case and see how it's coded and get right back to
you! Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:51 PM
Subject: Crown silicone

Since I have to wait to close my wing I have time to try to find some of

the

special Crown lube for the torque tube. I called the local industrial
supplier and asked if they have Crown #68034. They said they only have

8034.

Is that the same? Any known source for it? I'm not sure if I really need

it

anyway. The torque tube only has a bit of friction, but I'm sure it all

adds

up.
Jesse

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sat Feb 18, 2012 1:38 pm**

Well....the case, the can and the MSDS sheet have 68034 on them. I would
suspect that your local supplier just has a 4 digit computer system and bet
it's the same.

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:58 PM
Subject: Re: Crown silicone

I'll got out and look at a case and see how it's coded and get right back

to

you! Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:51 PM
Subject: Crown silicone

Since I have to wait to close my wing I have time to try to find some of
the
special Crown lube for the torque tube. I called the local industrial
supplier and asked if they have Crown #68034. They said they only have
8034.
Is that the same? Any known source for it? I'm not sure if I really need
it
anyway. The torque tube only has a bit of friction, but I'm sure it all
adds
up.
Jesse

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sat Feb 18, 2012 1:38 pm**

All of Crown's lubricants have five digit product codes starting with a 6.

So Jesse, what exactly are you going to do with all your extra condoms,
silicone lubricant and two weeks of free time while you wait for your
tanks to cure? :D

Wayne G. O'Shea wrote:

Well....the case, the can and the MSDS sheet have 68034 on them. I would
suspect that your local supplier just has a 4 digit computer system and bet
it's the same.

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:58 PM
Subject: Re: Crown silicone

I'll got out and look at a case and see how it's coded and get right back
to

you! Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:51 PM
Subject: Crown silicone

Since I have to wait to close my wing I have time to try to find some of
the

special Crown lube for the torque tube. I called the local industrial
supplier and asked if they have Crown #68034. They said they only have
8034.

Is that the same? Any known source for it? I'm not sure if I really need
it

anyway. The torque tube only has a bit of friction, but I'm sure it all
adds

up.
Jesse

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sat Feb 18, 2012 1:38 pm**

I just spit water all over my keyboard you bugger! Go to bed so you can get
up here and help your old man tomorrow!

----- Original Message -----
From: "Daryl C. W. O'Shea" <dos@dostech.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, September 17, 2005 1:38 AM
Subject: Re: Crown silicone

All of Crown's lubricants have five digit product codes starting with a 6.

So Jesse, what exactly are you going to do with all your extra condoms,
silicone lubricant and two weeks of free time while you wait for your
tanks to cure? :D

Wayne G. O'Shea wrote:
Well....the case, the can and the MSDS sheet have 68034 on them. I would
suspect that your local supplier just has a 4 digit computer system and

bet

it's the same.

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:58 PM
Subject: Re: Crown silicone

I'll got out and look at a case and see how it's coded and get right

back

to

you! Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:51 PM
Subject: Crown silicone

of

the
8034.

need

it
adds

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sat Feb 18, 2012 1:38 pm**

Maybe a trip to Thailand?

Thanks for the info guys.

From: "Daryl C. W. O'Shea" <dos@dostech.ca>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Crown silicone
Date: Sat, 17 Sep 2005 01:38:44 -0400

All of Crown's lubricants have five digit product codes starting with a 6.

So Jesse, what exactly are you going to do with all your extra condoms,
silicone lubricant and two weeks of free time while you wait for your
tanks to cure? :D

Wayne G. O'Shea wrote:
Well....the case, the can and the MSDS sheet have 68034 on them. I would
suspect that your local supplier just has a 4 digit computer system and
bet
it's the same.

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:58 PM
Subject: Re: Crown silicone

I'll got out and look at a case and see how it's coded and get right
back
to

you! Wayne

----- Original Message -----
From: "Jesse Jenks" <jessejenks@hotmail.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:51 PM
Subject: Crown silicone

of
the
8034.

need
it
adds

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sat Feb 18, 2012 1:38 pm**

I do remember the guy on the phone saying he was looking at the can, but he
was also saying it had another company name along with Crown, like it had
changed ownership.
Jesse

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: Re: Crown silicone
Date: Sat, 17 Sep 2005 01:35:57 -0400

I just spit water all over my keyboard you bugger! Go to bed so you can get
up here and help your old man tomorrow!

----- Original Message -----
From: "Daryl C. W. O'Shea" <dos@dostech.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, September 17, 2005 1:38 AM
Subject: Re: Crown silicone

All of Crown's lubricants have five digit product codes starting with a
6.
So Jesse, what exactly are you going to do with all your extra condoms,
silicone lubricant and two weeks of free time while you wait for your
tanks to cure? :D

Wayne G. O'Shea wrote:
Well....the case, the can and the MSDS sheet have 68034 on them. I
would
suspect that your local supplier just has a 4 digit computer system
and
bet
it's the same.

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 16, 2005 7:58 PM
Subject: Re: Crown silicone

back
to

of
have
need
all

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------