The Murphy Builders Site

Can someone tell me the size of the rivets on the horizontal stabilizer
the material is 5 layers thick the instructions tell you to go by the
rivet map it calls for 1/8 countersunk rivets in the area I am talking
about but they are not long enough to go through all the layers. I call
the factory no Tech guys on staff . Stephane tells me to call back but
when I call I get he is in a meeting all the time. Thanks Dale SR-033



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I checked mine and indeed they (the 1/8 cs) are a little short where they go
through those doublers. I've decided that being so few rivets and that
there is a small head and the stem is through all layers I am not going to
mess with them.

However if I had been smart enough to catch this like Dale did I would get
some longer rivets.

Scott
Moose 174

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Dale
Fultz
Sent: Tuesday, August 30, 2005 5:11 PM
To: rebel-builders@dcsol.com
Subject: Moose Horizontal Stabilizer

Can someone tell me the size of the rivets on the horizontal stabilizer
the material is 5 layers thick the instructions tell you to go by the
rivet map it calls for 1/8 countersunk rivets in the area I am talking
about but they are not long enough to go through all the layers. I call
the factory no Tech guys on staff . Stephane tells me to call back but
when I call I get he is in a meeting all the time. Thanks Dale SR-033



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------