The Murphy Builders Site

From: "Scott Aldrich" <sa@mwutah.com>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: RE: Fuel tubing
Date: Mon, 1 Aug 2005 13:42:05 -0600

Most common that I know of is 3/8th and the 3003 is plenty strong for fuel
lines, also easier to bend. I have seen them made with all 5052 but I
don't
think it is necessary.

FWIW
Scott

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jesse
Jenks
Sent: Monday, August 01, 2005 11:19 AM
To: rebel-builders@dcsol.com
Subject: Fuel tubing

I plan to use aluminum fuel tubing throughout my Rebel. What size and type
is best? 1/4 or 3/8 I would guess. ACS has a few different alloys of
tubing.

Is the 3003-0 "Versatube" strong enough, or should I use 5052-0, or 6061-0,
0r 6061-T6? Bending for corners will be an issue as well.
Thanks
Jesse





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

From: "Scott Aldrich" <sa@mwutah.com>
Reply-To: <rebel-builders@dcsol.com>
To: <rebel-builders@dcsol.com>
Subject: RE: Fuel tubing
Date: Mon, 1 Aug 2005 13:42:05 -0600

Most common that I know of is 3/8th and the 3003 is plenty strong for fuel
lines, also easier to bend. I have seen them made with all 5052 but I
don't
think it is necessary.

FWIW
Scott

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com] On Behalf Of Jesse
Jenks
Sent: Monday, August 01, 2005 11:19 AM
To: rebel-builders@dcsol.com
Subject: Fuel tubing

I plan to use aluminum fuel tubing throughout my Rebel. What size and type
is best? 1/4 or 3/8 I would guess. ACS has a few different alloys of
tubing.

Is the 3003-0 "Versatube" strong enough, or should I use 5052-0, or 6061-0,
0r 6061-T6? Bending for corners will be an issue as well.
Thanks
Jesse





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

From: rognal@dcsol.com
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: Fuel tubing
Date: Mon, 01 Aug 2005 18:36:05 -0800

Jesse,

Murphy supplied straight lengths of 5052-0 tubing, of 3/8ths inch OD, for
the
fuel lines in my kit. I purchased some 3/8ths inch 3003-0 'Versatube' for
the
more complicated runs. The 3003-0 is shipped in a coil from ACS and is much
easier to shape/form. I know of a flying RV at my home airport that the
builder used nothing but 3003-0 for his fuel lines. I think it is a pretty
common practice.

Roger Hoffman #687R
Eugene, OR USA!




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------