UMA makes a complete set of gages for the M14P. You can get 1 1/34 in
ch or 2
1/2 inch gages for ht engine instruments. The tach is available in th
e
standard 3 1/8 gage already range marked for the M14P. The tach requi
res the
western tach adapter. UMA had some reliability problems with their
connectors in the beginning, but have resolved that. They have been m
aking
the M14 instruments for many years now. They are also very helpful if
you
have trouble shooting problems and they stand behind their products.
You can contact Sharon Rathburn at UMA (540) 879-2040.
If you go to their web page
http://www.umainstruments.com/ you sill
see a
panel we did for an IAR with their back lighting.
George Coy
President
Gesoco Industries Inc.
629 Airport Rd.
Swanton, VT 05488
TEL 802-868-5633
FAX 802-868-4465
Web Site
www.gesoco.com
e-mail
George@gesoco.com
Franklin County Airport (KFSO)
-----Original Message-----
From:
mike.davis@dcsol.com [mailto:
mike.davis@dcsol.com]On Behalf O
f
sr227@dcsol.com
Sent: Saturday, July 16, 2005 10:08 AM
To:
rebel-builders@dcsol.com
Subject: M14 Engine Instruments- TACH
Does anyone have a recommendation for a good steam gauges for the m-1
4p.
TACH
and MP. I called Westach Instruments and they say they