Nitrous (formerly 0-360 in rebel)
Posted: Sat Feb 18, 2012 10:38 am
This doesn't sound correct and I sure hope it isn't as it would be a
show stopper for me. I'm reading about roughly 6 lb per minute nitrous
for 100 hp. That would be 100hp for 100
seconds on 10lbs rather than the 10 sec implied below. (10 times better
;) ) Fortunately I'm only after about 40 hp or less.
Ken
Al Paxhia wrote:
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
show stopper for me. I'm reading about roughly 6 lb per minute nitrous
for 100 hp. That would be 100hp for 100
seconds on 10lbs rather than the 10 sec implied below. (10 times better
;) ) Fortunately I'm only after about 40 hp or less.
Ken
Al Paxhia wrote:
TheI haven't had a need to punch the button yet. I plan to stay out of those
places.
I have several sets of nozzles that regulate the nitrous oxide volume.
10 lblowest volume set produces 25 HP. Here's my power formula, 1 pound of
nitrous produces 100 HP for 1 second or 25 HP for 4 seconds, I have a
bottle.
Al
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------