The Murphy Builders Site

hi all

so how do i paint my instrument panel, primers, flat coat, etc

mike#007

----------------------------------------------------------------------

NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.

If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Mike,

I just painted my panel last weekend. I used all Poly Fiber products. #310
cleaner, Aluma-Dyne E-2300 Conversion Coating, EP-420/430 Epoxy Primer, and
their regular enamel as the color coat. Applied the conversion coating with
fine scotchbrite pad to scuff the surface at the same time, per Poly Fibers
instructions.

Roger Hoffman #687R
Eugene, OR USA!



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------