Corrosion Inhibitor
Posted: Sat Feb 18, 2012 10:31 am
I am working at Hill Air Force Base on facilities and get chanced to bounce
my ideas of different folks and came across a suggestion I wanted to share -
I have been using phosphoric acid for an etch and then chromic acid for the
"alodyne" treatment on my parts before I assemble - I was assured that my
miniscule quantities would not create any hazards. One of the environmental
engineers at Hill suggested I look at PreKote - by Pantheon Chemical - Hill
won an environmental award for using it - Their website has some great info
-
http://www.pantheonchemical.com/prekote_costsavings.htm
Britt SR194
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
my ideas of different folks and came across a suggestion I wanted to share -
I have been using phosphoric acid for an etch and then chromic acid for the
"alodyne" treatment on my parts before I assemble - I was assured that my
miniscule quantities would not create any hazards. One of the environmental
engineers at Hill suggested I look at PreKote - by Pantheon Chemical - Hill
won an environmental award for using it - Their website has some great info
-
http://www.pantheonchemical.com/prekote_costsavings.htm
Britt SR194
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------