The Murphy Builders Site

do you have a photo site to look at yourMoose. I have just purchased my new
M-14 and had Murphy do the engine mount to my ring. I am getting excited
about building the Moose . Just looking for some more construction photos,or
anything related to theMoose. Thanks in advance. Mark Myres
----- Original Message -----
From: <RJBWoodman@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Friday, April 29, 2005 2:29 AM
Subject: Re: 2500 windshield

Good Morning Guys,

Don and I have just completed the windshield installation. I can shed some
lite. The mold for the windshield that LP Aero forms for us is not exactly
a
perfect fit. After extensive discussions with LP we decided to put heat to
the
sides and try to form to the fuselage better. As it was the sides that lap
the fuselage stuck out 1/2 to 3/4". We were fairly successful at doing
this.
The windshield does need to be trimmed to fit. We also heated the top
where it
meets the roof to let it lay down better with no force. We then layed up
a
fiberglass retainer. Came out nice. We can put some pics on the list if
anyone
would like.

Randy and Don
Moose 130
FAA inspection May 9th
Flying soon !
M-14 will be blowing smoke this weekend. Wow.




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

I thought I had saved the e-mail where someone had told us where we
could get empty caulking tubes but I can't find it.

I'm sorry to bother you again with the same question - but where can I
pick up some in the Toronto area??

Thanks
Jim
SR083Moose

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------