Thanks Wayne,
I would appreciate the info about the rivnuts etc. tools (dimpler? installer
etc.) If you have the stuff for sale I would be glad to purchase from
you as you are such a help to me reading all your posts. Even though I am
quite a bit behind most of the other builders on the site I am keeping a log
to make it easier to search when I get to the point in my build. I got the
epoxy primer we talked about (e-bay $25.00)and went and bought the thinner
it is really good stuff. Anyway when you get a chance let me know about the
rivnuts etc.
Bob Moose191
n 4/27/2005 7:24 PM,
OIFA@IRISHFIELD.ON.CA wrote to REBEL-BUILDERS:
-> Received: by dcsol.com (Wildcat! SMTP Router v6.1.451.4)
-> for
rebel-builders@dcsol.com; Wed, 27 Apr 2005 19:26:18 -0800
-> Received: from smtp.film-tech.net ([66.98.221.156]) EHLO=smtp.film-tech.net
-> by dcsol.com (Wildcat! SMTP v6.1.451.4) with SMTP
-> id 4302187; Wed, 27 Apr 2005 19:26:16 -0800
-> Received: from dilbert.dostech.net (barrie-dialport-
216.209.18.75.csolve.net [216.209.18.75])
-> (authenticated user
dos@smtp.film-tech.net)
-> by smtp.film-tech.net (smtp.film-tech.net [66.98.221.156])
-> (Cipher TLSv1:RC4-MD5:128) (MDaemon.PRO.v6.8.5.R)
-> with ESMTP id 26-md50000000383.tmp
-> for <
rebel-builders@dcsol.com>; Wed, 27 Apr 2005 22:26:09 -0500
-> Received: from celeron266a (celeron266a.midland.dostech.net [10.145.1.228])
-> by dilbert.dostech.net (8.12.8/8.12.
with SMTP id j3S3OK1G003949
-> for <
rebel-builders@dcsol.com>; Wed, 27 Apr 2005 23:24:25 -0400
-> Message-ID: <00b101c54ba1$c2458140$e401910a@celeron266a>
-> From: "Wayne G. O'Shea" <
oifa@irishfield.on.ca>
-> To: <
rebel-builders@dcsol.com>
-> References: <
20050428031814.B0E971406E0@mail.mwutah.com>
-> Subject: Re: nutplates/tinnerman/rivnuts
-> Date: Wed, 27 Apr 2005 23:24:11 -0400
-> Organization: O'Shea's Irish Field Aviation
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: text/plain; charset="iso-8859-1"
-> X-Orig-Content-Transfer-Encoding: 8bit
-> X-Priority: 3
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook Express 6.00.2800.1106
-> X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
-> X-Authenticated-Sender:
dos@smtp.film-tech.net
-> X-Spam-Processed: smtp.film-tech.net, Wed, 27 Apr 2005 22:26:09 -0500
-> (not processed: spam filter disabled)
-> X-MDRemoteIP: 216.209.18.75
-> X-Return-Path:
oifa@irishfield.on.ca
-> X-MDaemon-Deliver-To:
rebel-builders@dcsol.com
-> X-Virus-Assassin: Message filtered with wsAV v3.0.0 Build 001
->
-> Roll the edge Scott and they sit tight!
->
-> Depends if the hole is in a high load structural area or not.... to dictate
-> what to use.
->
-> Gotta get to bed so I can make it thru another 16 hour stint in the hangar
-> again tomorrow. Will answer Bob's email in more detail if I get a chance
-> tomorrow night.
->
-> Wayne
->
-> ----- Original Message -----
-> From: "Scott Aldrich" <
sa@mwutah.com>
-> To: <
rebel-builders@dcsol.com>
-> Sent: Wednesday, April 27, 2005 11:19 PM
-> Subject: RE: nutplates/tinnerman/rivnuts
->
->
-> > If I was to do my floor over I would go with the aluminum doubler
-> > recessed
-> > cover type. Currently I just have cutouts in the floor and the cover
-> > sits
-> > on top with no doubler. I do have nut plates flush riveted in the floor
-> > and
-> > machine screws hold the cover plates on.
-> >
-> > I wouldn't like the tinnerman nuts because they slip over the edge and
-> > would
-> > hold the cover plate up off the floor.
-> >
-> > FWIW
-> > Scott
-> >
-> > > -----Original Message-----
-> > > From:
mike.davis@dcsol.com [mailto:
mike.davis@dcsol.com] On Behalf Of
-> > >
bscheube@dcsol.com
-> > > Sent: Wednesday, April 27, 2005 11:47 AM
-> > > To:
rebel-builders@dcsol.com
-> > > Subject: nutplates/tinnerman/rivnuts
-> > >
-> > > Hi all,
-> > > Since it