The Murphy Builders Site

to all builders
can anyone give me the dimentions on stall fences for the elite
things i would like to know : on top of the wing, they run full lenght to go
around the leading edge and stop where.....
thickness of material
fence height
method of attachement

thanks to all
sincerely
gilles st pierre e717





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Gilles !

The wing fences on the Rebel (& Elite) are part of the McKenzie
STOL kit, which also includes a full leading edge cuff, & spill plates.

You might be able to buy just the fences from Angus McKenzie :

I'm still early on building my Elite, wondering, is this a good addition?
and can it be added after completing the airplane or should it be during
construction?
Thanks,
Mike Betti
771E

On Wed, 9 Feb 2005 22:30:23 -0500, rebel-builders@dcsol.com said:
[quote]
Hi Gilles !

The wing fences on the Rebel (& Elite) are part of the McKenzie
STOL kit, which also includes a full leading edge cuff, & spill plates.

You might be able to buy just the fences from Angus McKenzie :

Bob
you w ont have to dig into the snow....!!!
the infos that you gave me were more than valuable and i will go by that
thanks a lot
gilles





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------