The Murphy Builders Site

Hi all,
I've started the left wing and cannot find the Figure 9 template to define
the lift strut fitting angle. Can anyone help me with this? (Original
owner
built this much of the first wing.) It looks like this template is simply
a
right triangle, so perhaps if someone could just verify that (it is a Rt
triangle) and send me the dimensions of it.

This is only going to be in pre-1999 kits (and MAMs), as it looks like
they
changed to kit part (W-603) for the wing spar doubler at that time.
Thanks in advance,
-Ben /496R





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ben,
Sorry to take so long to answer your msg. but it took me two days to find

templates. My figure 9 is a right triangle 5" on each side.

Lonnie
171R

----- Original Message -----
From: <bransom@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, February 05, 2005 1:09 AM
Subject: Wing Figure 9 template

Hi all,
I've started the left wing and cannot find the Figure 9 template to define
the lift strut fitting angle. Can anyone help me with this? (Original
owner
built this much of the first wing.) It looks like this template is simply
a
right triangle, so perhaps if someone could just verify that (it is a Rt
triangle) and send me the dimensions of it.

This is only going to be in pre-1999 kits (and MAMs), as it looks like
they
changed to kit part (W-603) for the wing spar doubler at that time.
Thanks in advance,
-Ben /496R





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Ben,
Sorry to take so long to answer your msg. but it took me two days to find

templates. My figure 9 is a right triangle 5" on each side.

Lonnie
171R

----- Original Message -----
From: <bransom@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, February 05, 2005 1:09 AM
Subject: Wing Figure 9 template

Hi all,
I've started the left wing and cannot find the Figure 9 template to define
the lift strut fitting angle. Can anyone help me with this? (Original
owner
built this much of the first wing.) It looks like this template is simply
a
right triangle, so perhaps if someone could just verify that (it is a Rt
triangle) and send me the dimensions of it.

This is only going to be in pre-1999 kits (and MAMs), as it looks like
they
changed to kit part (W-603) for the wing spar doubler at that time.
Thanks in advance,
-Ben /496R





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Somehow we must have got our wires crossed, as, looking at my completed
wing
and the wing doubler template, 45 degrees (e.g. 5" each side, rt triangle)
didn't make sense. ANd if it were 45 degrees then my first perfect wing
would amount to ~$10 in scrap aluminum ...hate it when that happens. :)
Anyway, I called MAM to make sure on things. Angle is about 33-34 degrees
and I post that here on the off chance that someone might look someday and
take 45 by mistake.
-Ben/ 496R

Ben,
Sorry to take so long to answer your msg. but it took me two days to find

my

templates. My figure 9 is a right triangle 5" on each side.

Lonnie
171R

----- Original Message -----
From: <bransom@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Saturday, February 05, 2005 1:09 AM
Subject: Wing Figure 9 template

Hi all,
I've started the left wing and cannot find the Figure 9 template to
define
the lift strut fitting angle. Can anyone help me with this? (Original
owner
built this much of the first wing.) It looks like this template is
simply
a
right triangle, so perhaps if someone could just verify that (it is a
Rt
triangle) and send me the dimensions of it.

This is only going to be in pre-1999 kits (and MAMs), as it looks like
they
changed to kit part (W-603) for the wing spar doubler at that time.
Thanks in advance,
-Ben /496R





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------