Yes, you're right, it's like a crush plate on the outside, and
couldn't tell if there was one in between as well.
Hey, this old dog grew up in Manitoba, where the mosquitoes would
try to carry you off in the summer, and in winter we would dare
each other as kids to lick a steel post. So you'll have to
forgive me for gloating here once in a while.
You do have to laugh at the drivers here though when it does
snow. The media is always camped out at their favourite hills
first thing in the morning to film the show of cars bumping into
each other as they slide down. Then they put it to music and show
it on the evening news.
Walter
-----Original Message-----
From:
mike.davis@dcsol.com
[mailto:
mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Friday, January 07, 2005 5:07 PM
To:
rebel-builders@dcsol.com
Subject: Re: Rebel - mod to Silver Matco wheels
You're probably talking about the "disc's" that MAM
made up for each side of
the wheel half's to strengthen the wheel center web
Walter. I still have
these on mine and am still flying the gold wheels
without problems..other
than a set of bearings every three years or so. Bob's
wants to widen the
overall wheel wideth rim to rim with a spacer between
the two halves.
BTW...Do you even own a shovel you lucky dog???????
Cheers,
Wayne
----- Original Message -----
From: "Walter Klatt" <
Walter.Klatt@shaw.ca>
To: <
rebel-builders@dcsol.com>
Sent: Friday, January 07, 2005 8:01 PM
Subject: RE: Rebel - mod to Silver Matco wheels
I had the old gold wheels on mine, and remember putting on a
spacer that was supplied by MAM as an upgrade. I
will probably be
down to my hangar some time this weekend, so can
check mine as
well.
It's freeeezing cold here these days, and we had to
fight our way
through 5 cm of snow this morning to get to work.
Walter
-----Original Message-----
From:
mike.davis@dcsol.com
[mailto:
mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Friday, January 07, 2005 1:46 PM
To:
rebel-builders@dcsol.com
Subject: Re: Rebel - mod to Silver Matco wheels
I've seen it done on the gold ones...but not the
silvers (although they are
the ones that really need it!). I have the gold ones
here and can measure if
ya like Bob!
Wayne
----- Original Message -----
From: "Bob Patterson" <
beep@sympatico.ca>
To: <
rebel-builders@dcsol.com>
Sent: Friday, January 07, 2005 2:16 PM
Subject: Rebel - mod to Silver Matco wheels
be suitable.
-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
-------------------------------------------------------
----------
-------------------------------------------------------
----------
List archives located at:
https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator:
mike.davis@dcsol.com
-------------------------------------------------------
----------
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------