Page 1 of 1

Chanel

Posted: Sat Feb 18, 2012 9:54 am
by brad
Afternoon All,

Hopefully someone can help. When I recieved my parts (Rebel)
none of the aluminum channel was marked. Can you help with a description of
the following (perhaps size and guage)

ST-40, ST-28, ST-31

Thanks,

Brad Hewlett (R195)



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Chanel

Posted: Sat Feb 18, 2012 9:54 am
by Joel Jacobs
ST-40 - "L" channel - .020 - to make all the brackets for the floor
channels. The pieces I got were about 2' long.
ST-28 - "C" channel - .032 - for the elevator spars and is better than ST-31
for the door sills too. they are 4' long
ST-31 Same as ST-28 but only .020 and 6' or 8' long - can't remember
exactly.
Joel


----- Original Message -----
From: <brad@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, December 22, 2004 3:05 PM
Subject: Chanel

Afternoon All,

Hopefully someone can help. When I recieved my parts (Rebel)
none of the aluminum channel was marked. Can you help with a description
of
the following (perhaps size and guage)

ST-40, ST-28, ST-31

Thanks,

Brad Hewlett (R195)



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Chanel

Posted: Sat Feb 18, 2012 9:54 am
by brad
Joel,

Thanks for the quick response. Tonight I get to sort out what is what.

Brad Hewlett (R195)



On 12/22/2004 11:44 AM, JJ@SDF.LONESTAR.ORG wrote to REBEL-BUILDERS:

-> Received: by dcsol.com (Wildcat! SMTP Router v6.0.451.3)
-> for rebel-builders@dcsol.com; Wed, 22 Dec 2004 11:44:50 -0900
-> Received: from smtp809.mail.sc5.yahoo.com ([66.163.168.188])
HELO=smtp809.mail.sc5.yahoo.com
-> by dcsol.com (Wildcat! SMTP v6.0.451.3) with SMTP
-> id 168323265; Wed, 22 Dec 2004 11:44:48 -0900
-> Received: from unknown (HELO leadsled)
(jdj7499@sbcglobal.net@68.250.184.27 with login)
-> by smtp809.mail.sc5.yahoo.com with SMTP; 22 Dec 2004 20:44:33 -0000
-> Message-ID: <005401c4e867$08d886a0$6405a8c0@inet>
-> From: "Joel Jacobs" <jj@sdf.lonestar.org>
-> To: <rebel-builders@dcsol.com>
-> References: <1103745901@dcsol.com>
-> Subject: Re: Chanel
-> Date: Wed, 22 Dec 2004 15:44:27 -0500
-> X-Orig-MIME-Version: 1.0
-> X-Orig-Content-Type: text/plain; charset="Windows-1252"
-> X-Orig-Content-Transfer-Encoding: 7bit
-> X-Priority: 3
-> X-MSMail-Priority: Normal
-> X-Mailer: Microsoft Outlook Express 6.00.2800.1106
-> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106
-> X-Antivirus-Remover: Message filtered with wsAV v2.0.0 Build 001
->
-> ST-40 - "L" channel - .020 - to make all the brackets for the floor
-> channels. The pieces I got were about 2' long.
-> ST-28 - "C" channel - .032 - for the elevator spars and is better than ST-
31
-> for the door sills too. they are 4' long
-> ST-31 Same as ST-28 but only .020 and 6' or 8' long - can't remember
-> exactly.
-> Joel
->
->
-> ----- Original Message -----
-> From: <brad@dcsol.com>
-> To: <rebel-builders@dcsol.com>
-> Sent: Wednesday, December 22, 2004 3:05 PM
-> Subject: Chanel
->
->
-> > Afternoon All,
-> >
-> > Hopefully someone can help. When I recieved my parts (Rebel)
-> > none of the aluminum channel was marked. Can you help with a description
-> of
-> > the following (perhaps size and guage)
-> >
-> > ST-40, ST-28, ST-31
-> >
-> > Thanks,
-> >
-> > Brad Hewlett (R195)
-> >
-> >
-> >
-> > -----------------------------------------------------------------
-> > List archives located at: https://www.dcsol.com/login?mode=HTML
-> > username "rebel" password "builder"
-> > Subscription services located at:
-> > https://www.dcsol.com/public/code/html-subscribe.htm
-> > List administrator: mike.davis@dcsol.com
-> > -----------------------------------------------------------------
-> >
-> >
-> >
-> >
->





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Chanel

Posted: Sat Feb 18, 2012 9:54 am
by Wayne G. O'Shea
The ST-40 angle is actually .025. Others are correct at .020 for ST-31 and
.032 for ST-28. The ST-31 comes in 6' lengths

Cheers,
Wayne

----- Original Message -----
From: "Joel Jacobs" <jj@sdf.lonestar.org>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, December 22, 2004 3:44 PM
Subject: Re: Chanel

ST-40 - "L" channel - .020 - to make all the brackets for the floor
channels. The pieces I got were about 2' long.
ST-28 - "C" channel - .032 - for the elevator spars and is better than
ST-31
for the door sills too. they are 4' long
ST-31 Same as ST-28 but only .020 and 6' or 8' long - can't remember
exactly.
Joel


----- Original Message -----
From: <brad@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, December 22, 2004 3:05 PM
Subject: Chanel

Afternoon All,

Hopefully someone can help. When I recieved my parts (Rebel)
none of the aluminum channel was marked. Can you help with a description
of
the following (perhaps size and guage)

ST-40, ST-28, ST-31

Thanks,

Brad Hewlett (R195)



-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------