Tool saver
Posted: Sat Feb 18, 2012 9:54 am
I posted that back a week or so ago....here it is again:
I'm also told, by Brent at MAM, that Doall industrial puts out an awesome
tool wax (Toolsaver) P/N RAM24000001 Bout $12-14 a tube, but lasts a very
long time.
----- Original Message -----
From: "larry173" <larry@thermaire.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 20, 2004 12:11 PM
Subject: Re: modifications or updates to system/rudder pedals/etc
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I'm also told, by Brent at MAM, that Doall industrial puts out an awesome
tool wax (Toolsaver) P/N RAM24000001 Bout $12-14 a tube, but lasts a very
long time.
----- Original Message -----
From: "larry173" <larry@thermaire.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, December 20, 2004 12:11 PM
Subject: Re: modifications or updates to system/rudder pedals/etc
industrialYou can buy a cutting wax for non ferrous metal and aluminum from
tool suppliers. I comes in a tube, is about $35 a tube and will last
forever. You put it on the saw blade and works great. If you want I could
send you the name of the product if you don't have any luck finding it.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------