The Murphy Builders Site

Received: from klaptop (aug-as3-modem77.ctel.net [209.222.102.77])
by ctel.net (8.9.1/8.9.1) with SMTP id SAA29535
for <murphy-rebel@dcsol.com>; Sun, 5 Sep 1999 18:12:26 -0400 (EDT)
Message-ID: <001901bef7ea$ca1c1ac0$4d66ded1@klaptop>
Reply-To: "K. Oliver" <kboliver@ctel.net>
From: "K. Oliver" <kboliver@ctel.net>
To: "Murphy Rebel Builders List" <murphy-rebel@dcsol.com>
Date: Sun, 5 Sep 1999 18:05:37 -0400
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 5.00.2615.200
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200

Hi My name is Keith Oliver , I just posted a comment to the support site ,
but thought I might do it here also.

I received my Elite Kit about a month ago and all has been fine so far until
today. I am working on the elevator and have started to put the skin
on. After I clecoed the skin on I noticed the following.

The skin on the left side (pilot's) is 1/4 inch shorter than the right spar
to trailing edge. This leaves 1/4 inch of spar exposed. Does anyone else
have the same ????




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------