The Murphy Builders Site

Hi guys,
Just finishing up my rear carrythrough/wing attach and the manual is
telling me to cut a strip from fus-62 raw stock to put across the bottom
of the two bulkheads to make a 'box' channel. I can't seem to find my
fus-62 but I do have some .020 and .025 raw stock I can make this strip
from. Can anyone tell me what thickness it's supposed to be? If it's
supposed to be .020 can I use .025? My .020 is 12 feet long and rolled
up but I( have an easier to manage 2' X 4' piece of .025.
Thanks!
Joel Jacobs




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi Joel
According to Wray's spreadsheet, Fus-62 is a 7" x 48" piece of 0.020
stock so I would not hesitate to use 0.025
Ken

Joel Jacobs wrote:

Hi guys,
Just finishing up my rear carrythrough/wing attach and the manual is
telling me to cut a strip from fus-62 raw stock to put across the bottom
of the two bulkheads to make a 'box' channel. I can't seem to find my
fus-62 but I do have some .020 and .025 raw stock I can make this strip
from. Can anyone tell me what thickness it's supposed to be? If it's
supposed to be .020 can I use .025? My .020 is 12 feet long and rolled
up but I( have an easier to manage 2' X 4' piece of .025.
Thanks!
Joel Jacobs




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------