hey ceci shaw
did not forget, from sunday meeting, you can get rivets from following place
in mississauga
avdel
87 disco rd (off carlingview by airport)
416-679-0622
i usually deal with judy, tell her you are building plane and make sure you
get the apex brand rivets
have fun
mike jones#007
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
Do you want this big green box to go away? Well here's how...
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
Click here for full update
Wildcat! photo archives restored.
Click here for full update
Donors can now disable ads.
Click here for instructions
Add yourself to the user map.
Click here for instructions
rivet supplies
-
Jones, Michael
rivet supplies
OOPS THATS AVEX NOT APEX, SORRY
-----Original Message-----
From: Jones, Michael [mailto:MJones@hatch.ca]
Sent: Tuesday, November 30, 2004 9:07 AM
To: Rebel-Builders EMIAL (E-mail)
Subject: rivet supplies
hey ceci shaw
did not forget, from sunday meeting, you can get rivets from following place
in mississauga
avdel
87 disco rd (off carlingview by airport)
416-679-0622
i usually deal with judy, tell her you are building plane and make sure you
get the apex brand rivets
have fun
mike jones#007
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----Original Message-----
From: Jones, Michael [mailto:MJones@hatch.ca]
Sent: Tuesday, November 30, 2004 9:07 AM
To: Rebel-Builders EMIAL (E-mail)
Subject: rivet supplies
hey ceci shaw
did not forget, from sunday meeting, you can get rivets from following place
in mississauga
avdel
87 disco rd (off carlingview by airport)
416-679-0622
i usually deal with judy, tell her you are building plane and make sure you
get the apex brand rivets
have fun
mike jones#007
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
british thunder
rivet supplies
I've had a hard time finding 6061 sheets in anything thinner than .032.
does any one know of a place to get .025 or .020 in the Toronto-Mississauga
area?
Would any one know the measurement for the front bottom corner to convert
the door on a rebel to a swing up door? a new radius or 45 deg angle so it
will clear the strut.
Thanks
Cec 014R
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 30, 2004 8:06 AM
Subject: rivet supplies
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
does any one know of a place to get .025 or .020 in the Toronto-Mississauga
area?
Would any one know the measurement for the front bottom corner to convert
the door on a rebel to a swing up door? a new radius or 45 deg angle so it
will clear the strut.
Thanks
Cec 014R
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 30, 2004 8:06 AM
Subject: rivet supplies
placehey ceci shaw
did not forget, from sunday meeting, you can get rivets from following
youin mississauga
avdel
87 disco rd (off carlingview by airport)
416-679-0622
i usually deal with judy, tell her you are building plane and make sure
get the apex brand rivets
have fun
mike jones#007
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Wayne G. O'Shea
rivet supplies
Cecil..it's getting very difficult to get light sheet... as the Chinese are
buying most everything coming out of the mills(before it even hits the
suppliers warehouse). I know MAM is having a hell of a time and going as far
as Georgia and Florida to get .016 and .020 sheet. I haven't been able to
get any .020 locally for about 2+ years and am on my last part sheet.
Try Peckovers in Concord www.peckovers.com or Intergris Metals on the East
Mall in Etobicoke.
Is this what you wanted to know when you didn't leave a message the other
day??
Also the gull wing cut out....them numbers are in the archives somewhere.
Give me to late tomorrow and I'll measure my pattern.
Cheers,
Wayne
----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 11, 2004 8:33 AM
Subject: Re: rivet supplies
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
buying most everything coming out of the mills(before it even hits the
suppliers warehouse). I know MAM is having a hell of a time and going as far
as Georgia and Florida to get .016 and .020 sheet. I haven't been able to
get any .020 locally for about 2+ years and am on my last part sheet.
Try Peckovers in Concord www.peckovers.com or Intergris Metals on the East
Mall in Etobicoke.
Is this what you wanted to know when you didn't leave a message the other
day??
Also the gull wing cut out....them numbers are in the archives somewhere.
Give me to late tomorrow and I'll measure my pattern.
Cheers,
Wayne
----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 11, 2004 8:33 AM
Subject: Re: rivet supplies
Toronto-MississaugaI've had a hard time finding 6061 sheets in anything thinner than .032.
does any one know of a place to get .025 or .020 in the
area?
Would any one know the measurement for the front bottom corner to convert
the door on a rebel to a swing up door? a new radius or 45 deg angle so it
will clear the strut.
Thanks
Cec 014R
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 30, 2004 8:06 AM
Subject: rivet supplies
placehey ceci shaw
did not forget, from sunday meeting, you can get rivets from followingyouin mississauga
avdel
87 disco rd (off carlingview by airport)
416-679-0622
i usually deal with judy, tell her you are building plane and make sureget the apex brand rivets
have fun
mike jones#007
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-
Wayne Ouellette
rivet supplies
Hey Cec, depending on what size of pieces you need, I might be able to help
you out. I have two top wing skins that are .020 that are NFG. I live near
Barrie, here is my email address w.ouellette@sympatico.ca if you are
interested.
Wayne O
333R
----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 11, 2004 8:33 AM
Subject: Re: rivet supplies
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
you out. I have two top wing skins that are .020 that are NFG. I live near
Barrie, here is my email address w.ouellette@sympatico.ca if you are
interested.
Wayne O
333R
----- Original Message -----
From: "british thunder" <britishthunder@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Saturday, December 11, 2004 8:33 AM
Subject: Re: rivet supplies
Toronto-MississaugaI've had a hard time finding 6061 sheets in anything thinner than .032.
does any one know of a place to get .025 or .020 in the
area?
Would any one know the measurement for the front bottom corner to convert
the door on a rebel to a swing up door? a new radius or 45 deg angle so it
will clear the strut.
Thanks
Cec 014R
----- Original Message -----
From: "Jones, Michael" <MJones@hatch.ca>
To: "Rebel-Builders EMIAL (E-mail)" <rebel-builders@dcsol.com>
Sent: Tuesday, November 30, 2004 8:06 AM
Subject: rivet supplies
placehey ceci shaw
did not forget, from sunday meeting, you can get rivets from followingyouin mississauga
avdel
87 disco rd (off carlingview by airport)
416-679-0622
i usually deal with judy, tell her you are building plane and make sureget the apex brand rivets
have fun
mike jones#007
----------------------------------------------------------------------
NOTICE - This message is the property of HATCH. It may also be
confidential and/or privileged. If you are not the intended recipient
of this message you are hereby notified that you must not disseminate,
copy or take any action with respect to it.
If you have received this message in error please notify
HATCH immediately via mailto:MailAdmin@hatch.ca.
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
