RIVET NUT TOOL
Posted: Sat Feb 18, 2012 9:46 am
----- Original Message -----
From: <Wudoktor@aol.com>
To: <rebel-builders-d@dcsol.com>
Sent: Sunday, November 21, 2004 5:24 AM
Subject: RIVET NUT TOOL
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
From: <Wudoktor@aol.com>
To: <rebel-builders-d@dcsol.com>
Sent: Sunday, November 21, 2004 5:24 AM
Subject: RIVET NUT TOOL
A inexpensive rivet nut installation tool is available for about $20.
Planning to use it to attach wingtips and flow fences.
One supplier is:
_http://mdmetric.com/prod/rivetnuttool/rivetnuttool.htm_
(http://mdmetric.com/prod/rivetnuttool/rivetnuttool.htm)
Interesting video about how it works here
This one comes with 2 sizes: #10, 1/4"
One other supplier site has 3 sizes #8,#10, 1/4 "... also for $20. I
just
received this one but don't have the site or number handy. I can supply
if
anyone is interested.
Tony
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------