Aileron Hinge Reinforcement Al Angle Source
Posted: Sat Feb 18, 2012 9:40 am
Hi All,
I forgot to mention in my previous email that the large Al Angle I used to
reinforce the aileron hinge attachment area of the wing came from ACS.
ACS (#03-48675-1) 6061-T6 a 2.5"x4"x1/8"angle, a one foot length is just
enough so measure twice cut once. The shape as you see in the posted
pictures will come out of a 6" length.
The smaller angle is 1.5"x 1.5"x 1/8" also from ACS.
Catch you later,
Don B
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
I forgot to mention in my previous email that the large Al Angle I used to
reinforce the aileron hinge attachment area of the wing came from ACS.
ACS (#03-48675-1) 6061-T6 a 2.5"x4"x1/8"angle, a one foot length is just
enough so measure twice cut once. The shape as you see in the posted
pictures will come out of a 6" length.
The smaller angle is 1.5"x 1.5"x 1/8" also from ACS.
Catch you later,
Don B
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------