MURPHY 3500 Ventral Fin Plan
Posted: Sat Feb 18, 2012 9:34 am
Hi bb44bb,
If you are going to put her on floats you may will want to consider the
installation of a ventral fin. The fin may share a few rivet locations at
the rear underside of the fuselage. Something to think about. When I
installed mine from Montana Floats I had to drill out a few rivets and
carefully locate the fin to interfere the least with existing rivets.
Regards,
Don Boardman
& Partner, Randy Bowers
N622D Double Duce Delta Moose
#130 M-14PF 400HP, MT-Prop/Beta, Aerocet 3500 amphibs
Delta Lake, Rome, NY
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
If you are going to put her on floats you may will want to consider the
installation of a ventral fin. The fin may share a few rivet locations at
the rear underside of the fuselage. Something to think about. When I
installed mine from Montana Floats I had to drill out a few rivets and
carefully locate the fin to interfere the least with existing rivets.
Regards,
Don Boardman
& Partner, Randy Bowers
N622D Double Duce Delta Moose
#130 M-14PF 400HP, MT-Prop/Beta, Aerocet 3500 amphibs
Delta Lake, Rome, NY
I JUST STARTED THE BOTTOM OF THE FUSELAGE OF A MOOSE ARE ANY BIG SNAGS INVOLED
THAT I SHOULD BE AWARE OF?
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------