The Murphy Builders Site

Posted: **Sat Feb 18, 2012 9:34 am**

Don't forget that I have four completed flaperons (no fabric) and all the
parts for the tail kit Ralph.....if you decide to proceed with your Sport
Plane capable Rebel.

I can likely put together most everything for a fuselage as well, with very
few parts being needed from MAM to complete.

Also have a set of brand spanking new prebuilt 1800 amphibs for that Elite
or anyone else out there with same or a Rebel!! CASH price can't be matched
by the factory...and heard they aren't making anymore prebuilts as well!!

Wayne

----- Original Message -----
From: <LisaFly99@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 11, 2004 2:17 PM
Subject: Re: Rebel wings

In a message dated 10/11/2004 8:59:56 AM Central Standard Time,
rebaker@ftc-i.net writes:

I am considering building a Rebel as a 1320 # gross with Rotax 912S

after

our Elite is flown off and the idea of not having to build wings is
attractive. The main question is passing the 51% rule. Did you build

these

yourself and do you have a builders log / pictures that could accompany a
statement that you built them for inclusion in my log.

RALPH
One wing was built by a Charles Dudley, don't even know if he's still

alive.

I built the other wing. And have one picture with the top skin on and it
laying upside down on the bench with all the ribs and tank area open and a
picture of it being pressure tested. I didn't put the tips on because I

thought

Fife tips would be the way to go. I only have one of the four flaperons,

don't

ask why please. But it's covered. Give me a call. Home 847-263-8230 Cell
262-620-5020
Phil Smith
If you can read this thank a teacher
If you can read this in English thank a solder.

-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Sat Feb 18, 2012 9:34 am**

Sorry...Fuselage Kit SOLD!

Tail feathers, flaperons and amphib floats still available.

Wayne

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 11, 2004 5:07 PM
Subject: Re: Rebel wings/flaperons/amphibs/misc

Don't forget that I have four completed flaperons (no fabric) and all the
parts for the tail kit Ralph.....if you decide to proceed with your Sport
Plane capable Rebel.

I can likely put together most everything for a fuselage as well, with

very

few parts being needed from MAM to complete.

Also have a set of brand spanking new prebuilt 1800 amphibs for that Elite
or anyone else out there with same or a Rebel!! CASH price can't be

matched

by the factory...and heard they aren't making anymore prebuilts as well!!

Wayne

----- Original Message -----
From: <LisaFly99@aol.com>
To: <rebel-builders@dcsol.com>
Sent: Monday, October 11, 2004 2:17 PM
Subject: Re: Rebel wings

In a message dated 10/11/2004 8:59:56 AM Central Standard Time,
rebaker@ftc-i.net writes:

I am considering building a Rebel as a 1320 # gross with Rotax 912S
after
our Elite is flown off and the idea of not having to build wings is
attractive. The main question is passing the 51% rule. Did you build
these
yourself and do you have a builders log / pictures that could accompany

a

statement that you built them for inclusion in my log.

RALPH
One wing was built by a Charles Dudley, don't even know if he's still
alive.
I built the other wing. And have one picture with the top skin on and it
laying upside down on the bench with all the ribs and tank area open and

a

picture of it being pressure tested. I didn't put the tips on because I
thought
Fife tips would be the way to go. I only have one of the four flaperons,
don't
ask why please. But it's covered. Give me a call. Home 847-263-8230 Cell
262-620-5020
Phil Smith
If you can read this thank a teacher
If you can read this in English thank a solder.

-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------

-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------