The Murphy Builders Site

For builders of Murphy Aircraft Manufacturing kits - Bringing builders together
https://www.murphybuilders.net/

wanted warp drive prop

https://www.murphybuilders.net/viewtopic.php?f=1&t=4225

Page 1 of 1

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by jerry purdom
Good evening I'm looking for a 4 blade warp drive prop for sale as first
choice;second choice 3 blade if anybody interested in selling please email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o)) Getting one
of
those huge crates out of the hanger would make room for my new boat! (and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

Coming out for amphibs much later - AFTER the snow - maybe June, July,
or thereabouts ..... or maybe just on a Ramble .... sigh ....

...........bobp



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Wayne G. O'Shea
Jerry..try Bernie Desantis. He rolled his Rebel amphib up in a ball last
summer and I'm not sure if the prop took a hit or not. Either
desan@vianet.ca or desan@vianet.on.ca should work.

Cheers,
Wayne

----- Original Message -----
From: "jerry purdom" <jerrygoneflying@shaw.ca>
To: <rebel-builders@dcsol.com>
Cc: "les abbey" <les_abbey@telus.net>
Sent: Thursday, September 16, 2004 11:17 PM
Subject: wanted warp drive prop

Good evening I'm looking for a 4 blade warp drive prop for sale as first
choice;second choice 3 blade if anybody interested in selling please email
me at jerrygonflying@shaw.ca

THANKS
jerry



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Mike Davis
If anybody is trying to contact Jerry directly... his e-mail should be
jerrygoneflying@shaw.ca

Mike

----- Original Message -----
From: "jerry purdom" <jerrygoneflying@shaw.ca>
To: <rebel-builders@dcsol.com>
Cc: "les abbey" <les_abbey@telus.net>
Sent: Thursday, September 16, 2004 7:17 PM
Subject: wanted warp drive prop

Good evening I'm looking for a 4 blade warp drive prop for sale as first
choice;second choice 3 blade if anybody interested in selling please email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o)) Getting one
of
those huge crates out of the hanger would make room for my new boat! (and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

Coming out for amphibs much later - AFTER the snow - maybe June, July,
or thereabouts ..... or maybe just on a Ramble .... sigh ....

...........bobp



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by jerry purdom
THANKS AGAIN Mike a little typo error there and dcsol and shaw seems to be
working fine.

THANKS
jerry
----- Original Message -----
From: "Mike Davis" <mike.davis@dcsol.com>
To: <rebel-builders@dcsol.com>
Sent: Thursday, September 16, 2004 10:24 PM
Subject: Re: wanted warp drive prop

If anybody is trying to contact Jerry directly... his e-mail should be
jerrygoneflying@shaw.ca

Mike

----- Original Message -----
From: "jerry purdom" <jerrygoneflying@shaw.ca>
To: <rebel-builders@dcsol.com>
Cc: "les abbey" <les_abbey@telus.net>
Sent: Thursday, September 16, 2004 7:17 PM
Subject: wanted warp drive prop

Good evening I'm looking for a 4 blade warp drive prop for sale as first
choice;second choice 3 blade if anybody interested in selling please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o)) Getting
one
of
those huge crates out of the hanger would make room for my new boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

July,
....



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Barry Haines
A related question............................

Could someone enlighten me with regards to propellors: 2 blade vs. 3,
thinking there is better ground clearance with 3 blades but beyond that?????
Performance, Maintenance, Cost considerations?? Anything
else........................... Thanks for posting your reply....... Barry
Haines, Long time lurker, future Moose builder ;
)).............................

From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
Reply-To: <rebel-builders@dcsol.com>
To: rebel-builders@dcsol.com
Subject: Re: wanted warp drive prop
Date: Thu, 16 Sep 2004 23:30:59 -0400

Jerry..try Bernie Desantis. He rolled his Rebel amphib up in a ball last
summer and I'm not sure if the prop took a hit or not. Either
desan@vianet.ca or desan@vianet.on.ca should work.

Cheers,
Wayne

----- Original Message -----
From: "jerry purdom" <jerrygoneflying@shaw.ca>
To: <rebel-builders@dcsol.com>
Cc: "les abbey" <les_abbey@telus.net>
Sent: Thursday, September 16, 2004 11:17 PM
Subject: wanted warp drive prop

Good evening I'm looking for a 4 blade warp drive prop for sale as first
choice;second choice 3 blade if anybody interested in selling please
email
me at jerrygonflying@shaw.ca

THANKS
jerry



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Rick Harper
G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o)) Getting
one
of
those huge crates out of the hanger would make room for my new boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

Coming out for amphibs much later - AFTER the snow - maybe June,
July,
or thereabouts ..... or maybe just on a Ramble .... sigh
....
...........bobp



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Wayne G. O'Shea
Yep...so they say Rick...but I've been running a 3 blade x 70" on the nose
of mine for 9 years and it's still mint!! (knock on wood!). 5 years on the
O-235-C x 100 Hp and 4 now on the O-320 x 150 HP. Going to keep running it
as long as I can.... as I'd have to do some real teeter totter work on mine
if I have to put a 40 lb prop up there! (starting with taking the Gill-25
off the firewall !!)

Cheers,
Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 5:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o)) Getting
one
of
those huge crates out of the hanger would make room for my new boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

Coming out for amphibs much later - AFTER the snow - maybe June,
July,
or thereabouts ..... or maybe just on a Ramble .... sigh
....
...........bobp



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Rick Harper
WOW .... that's impressive !
(I s'pose it must be mainly due to the low compression of those models
of engine .. yes ?)

Our 0-235 was the 9.7:1 ... HIGH compression model ... PLUS we fitted
the LSE electronic ignition (bigger BANG again !) .... our Warp drive
lasted less than 11 hours ! :o(

Rick
----- Original Message -----
From: Wayne G. O'Shea
To: rebel-builders@dcsol.com
Sent: Saturday, September 18, 2004 7:51 AM
Subject: Re: wanted warp drive prop


Yep...so they say Rick...but I've been running a 3 blade x 70" on the
nose
of mine for 9 years and it's still mint!! (knock on wood!). 5 years on
the
O-235-C x 100 Hp and 4 now on the O-320 x 150 HP. Going to keep
running it
as long as I can.... as I'd have to do some real teeter totter work on
mine
if I have to put a 40 lb prop up there! (starting with taking the
Gill-25
off the firewall !!)

Cheers,
Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 5:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the
firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling
please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o))
Getting
one
of
those huge crates out of the hanger would make room for my new
boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

Coming out for amphibs much later - AFTER the snow - maybe
June,
July,
or thereabouts ..... or maybe just on a Ramble ....
sigh
....
...........bobp



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Rick Harper
PS .. sorry

You're obviously on line at the moment Wayne ... (I only just sent that
e-mail )

It's 0810 hrs here (Saturday morning) .... It must be Friday arvo /
night there ... what time is it now ?

(just curious :o)

Rick
----- Original Message -----
From: Wayne G. O'Shea
To: rebel-builders@dcsol.com
Sent: Saturday, September 18, 2004 7:51 AM
Subject: Re: wanted warp drive prop


Yep...so they say Rick...but I've been running a 3 blade x 70" on the
nose
of mine for 9 years and it's still mint!! (knock on wood!). 5 years on
the
O-235-C x 100 Hp and 4 now on the O-320 x 150 HP. Going to keep
running it
as long as I can.... as I'd have to do some real teeter totter work on
mine
if I have to put a 40 lb prop up there! (starting with taking the
Gill-25
off the firewall !!)

Cheers,
Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 5:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the
firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling
please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o))
Getting
one
of
those huge crates out of the hanger would make room for my new
boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

Coming out for amphibs much later - AFTER the snow - maybe
June,
July,
or thereabouts ..... or maybe just on a Ramble ....
sigh
....
...........bobp



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Wayne G. O'Shea
I think a big part of mine surviving is the fact I'm on grass and never idle
below about 1200 RPM. The other thing is mine is 70"..not 72" for a
different harmonic note and less total arm twisting on that alum collar
area. Possible that maybe he had higher quality control or thicker alum
collar area on the earlier stuff as well...who know!

My O-235 was a nice 6.5 to 1, I believe, and the 150Hp O-320 isn't much
higher..think 7 to 1 but don't have my book in the house.

Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 6:09 PM
Subject: Re: wanted warp drive prop

WOW .... that's impressive !
(I s'pose it must be mainly due to the low compression of those models
of engine .. yes ?)

Our 0-235 was the 9.7:1 ... HIGH compression model ... PLUS we fitted
the LSE electronic ignition (bigger BANG again !) .... our Warp drive
lasted less than 11 hours ! :o(

Rick
----- Original Message -----
From: Wayne G. O'Shea
To: rebel-builders@dcsol.com
Sent: Saturday, September 18, 2004 7:51 AM
Subject: Re: wanted warp drive prop


Yep...so they say Rick...but I've been running a 3 blade x 70" on the
nose
of mine for 9 years and it's still mint!! (knock on wood!). 5 years on
the
O-235-C x 100 Hp and 4 now on the O-320 x 150 HP. Going to keep
running it
as long as I can.... as I'd have to do some real teeter totter work on
mine
if I have to put a 40 lb prop up there! (starting with taking the
Gill-25
off the firewall !!)

Cheers,
Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 5:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the
firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling
please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o))
Getting
one
of
those huge crates out of the hanger would make room for my new
boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

June,
July,
sigh
....



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Wayne G. O'Shea
6:17 PM Friday in Ontario !

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 6:11 PM
Subject: Re: wanted warp drive prop

PS .. sorry

You're obviously on line at the moment Wayne ... (I only just sent that
e-mail )

It's 0810 hrs here (Saturday morning) .... It must be Friday arvo /
night there ... what time is it now ?

(just curious :o)

Rick
----- Original Message -----
From: Wayne G. O'Shea
To: rebel-builders@dcsol.com
Sent: Saturday, September 18, 2004 7:51 AM
Subject: Re: wanted warp drive prop


Yep...so they say Rick...but I've been running a 3 blade x 70" on the
nose
of mine for 9 years and it's still mint!! (knock on wood!). 5 years on
the
O-235-C x 100 Hp and 4 now on the O-320 x 150 HP. Going to keep
running it
as long as I can.... as I'd have to do some real teeter totter work on
mine
if I have to put a 40 lb prop up there! (starting with taking the
Gill-25
off the firewall !!)

Cheers,
Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 5:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the
firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling
please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o))
Getting
one
of
those huge crates out of the hanger would make room for my new
boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

June,
July,
sigh
....



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Rick Harper
Good points Wayne !

Thanks for the time too .... it seems you guys are 14 hrs behind us ...
good to know incase I ever have to ring :o)

Thanks

Rick
541R
----- Original Message -----
From: Wayne G. O'Shea
To: rebel-builders@dcsol.com
Sent: Saturday, September 18, 2004 8:17 AM
Subject: Re: wanted warp drive prop


I think a big part of mine surviving is the fact I'm on grass and
never idle
below about 1200 RPM. The other thing is mine is 70"..not 72" for a
different harmonic note and less total arm twisting on that alum
collar
area. Possible that maybe he had higher quality control or thicker
alum
collar area on the earlier stuff as well...who know!

My O-235 was a nice 6.5 to 1, I believe, and the 150Hp O-320 isn't
much
higher..think 7 to 1 but don't have my book in the house.

Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 6:09 PM
Subject: Re: wanted warp drive prop

WOW .... that's impressive !
(I s'pose it must be mainly due to the low compression of those
models
of engine .. yes ?)

Our 0-235 was the 9.7:1 ... HIGH compression model ... PLUS we
fitted
the LSE electronic ignition (bigger BANG again !) .... our Warp
drive
lasted less than 11 hours ! :o(

Rick
----- Original Message -----
From: Wayne G. O'Shea
To: rebel-builders@dcsol.com
Sent: Saturday, September 18, 2004 7:51 AM
Subject: Re: wanted warp drive prop


Yep...so they say Rick...but I've been running a 3 blade x 70" on
the
nose
of mine for 9 years and it's still mint!! (knock on wood!). 5
years on
the
O-235-C x 100 Hp and 4 now on the O-320 x 150 HP. Going to keep
running it
as long as I can.... as I'd have to do some real teeter totter
work on
mine
if I have to put a 40 lb prop up there! (starting with taking the
Gill-25
off the firewall !!)

Cheers,
Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 5:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on
?!?
(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the
firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for
sale as
first
choice;second choice 3 blade if anybody interested in selling
please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o))
Getting
one
of
those huge crates out of the hanger would make room for my
new
boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

maybe
June,
July,
sigh
....



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by jerry purdom
Hi Rick it's for an 0-320 150 hp on a pt2,really interested in a 4 blade
warp drive if possible.

THANKS
jerry
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 2:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o)) Getting
one
of
those huge crates out of the hanger would make room for my new boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

Coming out for amphibs much later - AFTER the snow - maybe June,
July,
or thereabouts ..... or maybe just on a Ramble .... sigh
....
...........bobp



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by jerry purdom
Hi Wayne mine is a 4 blade on an 0-360 for well over 400 hrs and on floats
and it seems that if you don't idle down below 1000 rpm the prop is just
fine.

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 3:17 PM
Subject: Re: wanted warp drive prop

I think a big part of mine surviving is the fact I'm on grass and never
idle
below about 1200 RPM. The other thing is mine is 70"..not 72" for a
different harmonic note and less total arm twisting on that alum collar
area. Possible that maybe he had higher quality control or thicker alum
collar area on the earlier stuff as well...who know!

My O-235 was a nice 6.5 to 1, I believe, and the 150Hp O-320 isn't much
higher..think 7 to 1 but don't have my book in the house.

Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 6:09 PM
Subject: Re: wanted warp drive prop

WOW .... that's impressive !
(I s'pose it must be mainly due to the low compression of those models
of engine .. yes ?)

Our 0-235 was the 9.7:1 ... HIGH compression model ... PLUS we fitted
the LSE electronic ignition (bigger BANG again !) .... our Warp drive
lasted less than 11 hours ! :o(

Rick
----- Original Message -----
From: Wayne G. O'Shea
To: rebel-builders@dcsol.com
Sent: Saturday, September 18, 2004 7:51 AM
Subject: Re: wanted warp drive prop


Yep...so they say Rick...but I've been running a 3 blade x 70" on the
nose
of mine for 9 years and it's still mint!! (knock on wood!). 5 years on
the
O-235-C x 100 Hp and 4 now on the O-320 x 150 HP. Going to keep
running it
as long as I can.... as I'd have to do some real teeter totter work on
mine
if I have to put a 40 lb prop up there! (starting with taking the
Gill-25
off the firewall !!)

Cheers,
Wayne

----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 5:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the
firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling
please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Getting
one
of
boat!
(and
June,
July,
sigh
....

-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------





-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

wanted warp drive prop

Posted: Sat Feb 18, 2012 9:31 am
by Rick Harper
G'day Jerry

I don't "have" a Warp Drive any more ..... I just wanted you to be
aware that they do not seem to work well on HIGH COMPRESSION direct
drive engines !

If your engine is LOW compression , they seem to last quite well !

Hope this helps

Rick
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Sent: Saturday, September 18, 2004 10:53 AM
Subject: Re: wanted warp drive prop


Hi Rick it's for an 0-320 150 hp on a pt2,really interested in a 4
blade
warp drive if possible.

THANKS
jerry
----- Original Message -----
From: "Rick Harper" <rjwh@optusnet.com.au>
To: <rebel-builders@dcsol.com>
Sent: Friday, September 17, 2004 2:32 PM
Subject: Re: wanted warp drive prop

G'day Jerry ...

WHAT engine are you planning to put this Warp Drive prop' on ?!?

(whilst they ARE a good propeller in many ways .... they are NOT
suitable for "direct drive engines" ..... the shock pulse of the
firing
delaminates the root of the blades eventually)

Rick Harper 541R
----- Original Message -----
From: jerry purdom
To: rebel-builders@dcsol.com
Cc: les abbey
Sent: Friday, September 17, 2004 1:17 PM
Subject: wanted warp drive prop


Good evening I'm looking for a 4 blade warp drive prop for sale as
first
choice;second choice 3 blade if anybody interested in selling
please
email
me at jerrygonflying@shaw.ca

THANKS
jerry
----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 8:05 PM
Subject: Amphibs

Could always just come to Penetang and get a set here!! :o))
Getting
one
of
those huge crates out of the hanger would make room for my new
boat!
(and
pay for part of it!)

----- Original Message -----
From: "Bob Patterson" <beep@sympatico.ca>
To: <rebel-builders@dcsol.com>
Sent: Wednesday, September 15, 2004 10:50 PM
Subject: Re: Delivery Failures

Coming out for amphibs much later - AFTER the snow - maybe
June,
July,
or thereabouts ..... or maybe just on a Ramble ....
sigh
....
...........bobp



-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------







-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
All times are UTC-09:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/