The Murphy Builders Site

Rebel #687 came with seatframes having the 12-13 inch high diagonal. I posted
a photo to the Rebel-Interiors archives if anyone is interested. I built them
per the builder's manual with the aluminum back pan riveted to the back side
of the seatback frame.

Roger Hoffman #687R
Eugene, OR USA!




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hi All
Sorry this is a few days after topic - just back from 2 weeks in Scotland
(including 30 mins in a strait float Cub :-) )
Elite 745E also came with the 12 inch seat back diagonal support (shipped
about April last year). The skin is to be attached to the REAR of the frame.
Am I correct in assuming no-one has had a problem with this design ?. I
guess the holes at the rear of the tubing will produce less weakening than
holes at the front would do.
Thanks
Nigel
Derby England

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
rognal@dcsol.com
Sent: 11 July 2004 17:34
To: rebel-builders@dcsol.com
Subject: Re: Broken Seat back


Rebel #687 came with seatframes having the 12-13 inch high diagonal. I
posted
a photo to the Rebel-Interiors archives if anyone is interested. I built
them
per the builder's manual with the aluminum back pan riveted to the back side
of the seatback frame.

Roger Hoffman #687R
Eugene, OR USA!




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Nigel
Several years ago landing near home the Maule tail wheel broke off our Rebel
049.After removing the tail wheel I brake-taxied with the tail in the air to
take-off and land at our home strip.While taxiing up to the hanger the seat
back failed from the force I was exerting to keep the tail up and negotiate
the turns.The skin tore off the frame.I remade a heavier seat back and
looped a 4"wide piece of .025 around the frame at the lumbar area to prevent
a reoccurrence...........Angus


----- Original Message -----
From: "N.Smith" <admin@airnig.co.uk>
To: <rebel-builders@dcsol.com>
Sent: Thursday, July 22, 2004 2:31 PM
Subject: RE: Broken Seat back

Hi All
Sorry this is a few days after topic - just back from 2 weeks in Scotland
(including 30 mins in a strait float Cub :-) )
Elite 745E also came with the 12 inch seat back diagonal support (shipped
about April last year). The skin is to be attached to the REAR of the

frame.

Am I correct in assuming no-one has had a problem with this design ?. I
guess the holes at the rear of the tubing will produce less weakening than
holes at the front would do.
Thanks
Nigel
Derby England

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
rognal@dcsol.com
Sent: 11 July 2004 17:34
To: rebel-builders@dcsol.com
Subject: Re: Broken Seat back


Rebel #687 came with seatframes having the 12-13 inch high diagonal. I
posted
a photo to the Rebel-Interiors archives if anyone is interested. I built
them
per the builder's manual with the aluminum back pan riveted to the back

side

of the seatback frame.

Roger Hoffman #687R
Eugene, OR USA!




-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------






-----------------------------------------------------
List archives located at:
https://www.dcsol.com/default.htm
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------