Page 1 of 1
Warp Prop angle
Posted: Sat Feb 18, 2012 9:16 am
by Walter Klatt
Which engine and size Warp do you have? I used a Warp on my 0320
150hp on the floats and had the pitch set for 2450 on take-off.
It was a 3 blade 72 inch with the wide tips. I think the pitch
was around 10 or 11, can't remember exactly, would have to go
back in the archives myself to check. If you go 2500, you will
lose cruise speed.
Walter
[quote]-----Original Message-----
From:
mike.davis@dcsol.com
[mailto:
mike.davis@dcsol.com]On Behalf Of
Peter, Juliet, & Wanaao Piascik
Sent: Saturday, May 22, 2004 8:02 AM
To:
murphy-rebel@dcsol.com
Subject: Warp Prop angle
Hi guys:
Float season is really late this year in the
Territories. I'm going to
fly my Rebel to Cooking Lake, just outside of
Edmonton, to put my
floats on.
I'm am looking for prop angles for my Warp Drive
prop. I have it set
to 13
Warp Prop angle
Posted: Sat Feb 18, 2012 9:16 am
by Peter, Juliet, & Wanaao P
Hi guys:
Float season is really late this year in the Territories. I'm going to
fly my Rebel to Cooking Lake, just outside of Edmonton, to put my
floats on.
I'm am looking for prop angles for my Warp Drive prop. I have it set
to 13
Warp Prop angle
Posted: Sat Feb 18, 2012 9:16 am
by Drew Dalgleish
At 09:01 AM 5/22/2004 -0600, you wrote:
[quote]Hi guys:
Float season is really late this year in the Territories. I'm going to
fly my Rebel to Cooking Lake, just outside of Edmonton, to put my
floats on.
I'm am looking for prop angles for my Warp Drive prop. I have it set
to 13
Warp Prop angle
Posted: Sat Feb 18, 2012 9:16 am
by Legeorgen
Northofsixty,
What engine are you flying behind?
Bruce
*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at
https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------
Warp Prop angle
Posted: Sat Feb 18, 2012 9:16 am
by Peter, Juliet, & Wanaao P
Hi guys:
I have a 0-320.
Peter
On 22-May-04, at 1:23 PM,
Legeorgen@aol.com wrote:
*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at
https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail
mike.davis@dcsol.com
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at:
https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe:
rebel-builders-unsubscribe@dcsol.com
List administrator:
mike.davis@dcsol.com
-----------------------------------------------------------------