The Murphy Builders Site

I am looking at the installation of my MA-4 curburettor on an O-360, and
it's going to result in some fairly tight bends in the control cables,
Is there any reason I shouldn't rotate it 90*, so the cables come off
the left side of the carb., rather than off the rear?

Al Hepburn



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Al, talk to Ken BEANLAND who runs a Christavia web page or search his name.
He ran into the same problem with a Franklin he was putting in his project.
I believe he got some advise out of the states without "fear of liability"
and I thing there was no problem.

Steve
Rebel #637

From: "Alan Hepburn" <ahepburn@renc.igs.net>
Reply-To: <murphy-rebel@dcsol.com>
To: murphy-rebel@dcsol.com
Subject: Carburettor Orientation
Date: Thu, 20 May 2004 06:07:49 -0400

I am looking at the installation of my MA-4 curburettor on an O-360, and
it's going to result in some fairly tight bends in the control cables,
Is there any reason I shouldn't rotate it 90*, so the cables come off
the left side of the carb., rather than off the rear?

Al Hepburn



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

_________________________________________________________________
Add photos to your messages with MSN Premium. Get 2 months FREE*
http://join.msn.com/?pgmarket=en-ca&pag ... S_Taglines



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------