The Murphy Builders Site

From: Al Paxhia <paxhia2@comcast.net>
Reply-To: murphy-rebel@dcsol.com
Date: Mon, 19 Apr 2004 12:40:54 -0700
To: murphy-rebel@dcsol.com
Subject: Re: Seafins - Stab Mods

I measured the seafins and they are .080 thick.
Al
----- Original Message -----
From: "Al Paxhia" <paxhia2@comcast.net>
To: <murphy-rebel@dcsol.com>
Sent: Monday, April 19, 2004 10:35 AM
Subject: Re: Seafins - Stab Mods

Hi Don,
I will measure to be sure and let you know but I think .063.
Al
----- Original Message -----
From: "Don Boardman" <dboardm3@twcny.rr.com>
To: <murphy-rebel@dcsol.com>
Sent: Monday, April 19, 2004 10:30 AM
Subject: Re: Seafins - Stab Mods

Hi Al,

We are getting close!
What thickness did you use for your Seafins?

Don B.

the

for

new

rivets

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://www.dcsol.com:81/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://www.dcsol.com:81/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://www.dcsol.com:81/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

From: Al Paxhia <paxhia2@comcast.net>
Reply-To: rebel-builders@dcsol.com
Date: Sun, 12 Dec 2004 21:51:43 -0800
To: rebel-builders@dcsol.com
Subject: Re: Al Paxhia, Panel Rivets/Water Rudders

Hi Don,
The rivets that sheared were the ones that attach the instrument panel to
the door posts. I did go up one size to 5/32" and interleaved with 1/8"
rivets. Note the reason they sheared was the v-brace had broken and was
still doing water operations in rough water. I think the panel would have
been just fine if the v-brace had been there. The real issue is strengthen
the upper fittings on the v-brace. I welded on a thicker tab and welded a
gusset on the side of the tab.
Water rudders should have springs in the cables to the air rudder and tight
enough to keep tension in the cable. The spring will allow the air rudder to
operate if the water rudder becomes jammed.
Al
----- Original Message -----
From: "Don Boardman" <dboardm3@twcny.rr.com>
To: <rebel-builders@dcsol.com>
Sent: Sunday, December 12, 2004 7:31 PM
Subject: Al Paxhia, Panel Rivets/Water Rudders

Hi Al,

I hope I am remembering this right. Did you indicate that you had some
panel
rivets shear with a water landing?

If so, which rivets?

Did you replace with larger rivets?

What was your fix?

I am also installing my water rudder cables. I am trying to determine how
tight they need to be (or loose they need to be) I would appreciate what
your experience in this area has been. Al, others

Getting closer every day,
Don B




-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

-----------------------------------------------------------------
List archives located at: https://www.dcsol.com/login?mode=HTML
username "rebel" password "builder"
Subscription services located at:
https://www.dcsol.com/public/code/html-subscribe.htm
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------