The Murphy Builders Site

Received: from enaila.nidlink.com (root@enaila.nidlink.com [216.18.128.8])
by lanfear.nidlink.com (8.9.0/8.9.0) with ESMTP id RAA02356
for <murphy-rebel@dcsol.com>; Thu, 1 Jul 1999 17:14:06 -0700 (PDT)
Received: from nidlink.com (pm5-6.nidlink.com [216.18.141.13])
by enaila.nidlink.com (8.9.0/8.9.0) with ESMTP id RAA05658
for <murphy-rebel@dcsol.com>; Thu, 1 Jul 1999 17:14:05 -0700 (PDT)
Message-ID: <377C0667.18FBDFFE@nidlink.com>
Date: Thu, 01 Jul 1999 17:23:03 -0700
From: subersys <subersys@nidlink.com>
X-Mailer: Mozilla 4.5 [en] (Win95; I)
X-Accept-Language: en
MIME-Version: 1.0
To: " (Murphy Rebel Builders List)" <murphy-rebel@dcsol.com>
Subject: Warp drive blades
References: <E10zivw-0007XR-00@mail4.toronto.istar.net>
Content-Type: text/plain; charset=x-user-defined
Content-Transfer-Encoding: 7bit

I need some information. Is there any of you guys out there flying with
3 blade Warp Drive blades on a Lycoming 0320 with 150 or 160 Hp. I
would appreciate numbers in pitch and RPM if you are. I am trying to
get a feel for comparison numbers with my Subaru.
--
Dave Bangle http://www.subielyc.com/



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Received: from enaila.nidlink.com (root@enaila.nidlink.com [216.18.128.8])
by lanfear.nidlink.com (8.9.0/8.9.0) with ESMTP id UAA24204
for <murphy-rebel@dcsol.com>; Thu, 1 Jul 1999 20:50:42 -0700 (PDT)
Received: from nidlink.com (pm9-13.nidlink.com [216.18.141.68])
by enaila.nidlink.com (8.9.0/8.9.0) with ESMTP id UAA17489
for <murphy-rebel@dcsol.com>; Thu, 1 Jul 1999 20:50:41 -0700 (PDT)
Message-ID: <377C392B.1F5B6B9E@nidlink.com>
Date: Thu, 01 Jul 1999 20:59:39 -0700
From: subersys <subersys@nidlink.com>
X-Mailer: Mozilla 4.5 [en] (Win95; I)
X-Accept-Language: en
MIME-Version: 1.0
To: " (Murphy Rebel Builders List)" <murphy-rebel@dcsol.com>
Subject: Re: Warp drive blades
References: <NCBBLJFHFJBOEDPJNEKAGEJMCDAA.del@dryden.net>
Content-Type: text/plain; charset=x-user-defined
Content-Transfer-Encoding: 7bit

What I am really looking for is what static max RPM the 0320 guys get
and what pitch setting. Cruise speeds and RPMs will vary with each
airplane. I get 115 indicated with 4600 and 14 degrees but it doesn't
give me anything to compare unless I get some static numbers full
throttle. Then I can adjust to same pitch and compare. Thanks all.
--
Dave Bangle http://www.subielyc.com/



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Received: from boaismgr ([216.211.112.48]) by mailmachine.drybrd.on.ca
(Netscape Messaging Server 3.5) with SMTP id 238
for <murphy-rebel@dcsol.com>; Thu, 1 Jul 1999 23:27:12 -0500
From: "Del Schmucker" <del@dryden.net>
To: "Murphy Rebel Builders List" <murphy-rebel@dcsol.com>
Subject: RE: Warp drive blades
Date: Thu, 1 Jul 1999 22:55:56 -0500
Message-ID: <NCBBLJFHFJBOEDPJNEKAEEJOCDAA.del@dryden.net>
MIME-Version: 1.0
Content-Type: text/plain;
charset="x-user-defined"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook IMO, Build 9.0.2212 (4.71.2419.0)
Importance: Normal
X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
In-Reply-To: <377C392B.1F5B6B9E@nidlink.com>

Dave:

My static run up shows around 4800 rpm at 15 degrees pitch. I know you
wanted numbers for the 0320 but I thought this might be useful with Subaru.

Del

-----Original Message-----
From: subersys [mailto:subersys@nidlink.com]
Sent: Thursday, July 01, 1999 11:00 PM
To: (Murphy Rebel Builders List)
Subject: Re: Warp drive blades

What I am really looking for is what static max RPM the 0320 guys get
and what pitch setting. Cruise speeds and RPMs will vary with each
airplane. I get 115 indicated with 4600 and 14 degrees but it doesn't
give me anything to compare unless I get some static numbers full
throttle. Then I can adjust to same pitch and compare. Thanks all.
--
Dave Bangle http://www.subielyc.com/
*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Received: from enaila.nidlink.com (root@enaila.nidlink.com [216.18.128.8])
by lanfear.nidlink.com (8.9.0/8.9.0) with ESMTP id UAA24978
for <murphy-rebel@dcsol.com>; Thu, 1 Jul 1999 20:58:11 -0700 (PDT)
Received: from nidlink.com (pm9-13.nidlink.com [216.18.141.68])
by enaila.nidlink.com (8.9.0/8.9.0) with ESMTP id UAA18991
for <murphy-rebel@dcsol.com>; Thu, 1 Jul 1999 20:58:09 -0700 (PDT)
Message-ID: <377C3AEC.15ACDF5A@nidlink.com>
Date: Thu, 01 Jul 1999 21:07:08 -0700
From: subersys <subersys@nidlink.com>
X-Mailer: Mozilla 4.5 [en] (Win95; I)
X-Accept-Language: en
MIME-Version: 1.0
To: " (Murphy Rebel Builders List)" <murphy-rebel@dcsol.com>
Subject: Re: Warp drive blades
References: <E10zsYV-0004lo-00@mail4.toronto.istar.net>
Content-Type: text/plain; charset=x-user-defined
Content-Transfer-Encoding: 7bit

Bob Patterson wrote:

I'm not running one, Dave, but I have flown several ....

Typical settings start in the 13 degree range, and yield about 108 to
110 mph cruise at 2,450 rpm - all this on amphib floats, so may not be

much

help for you in comparison. It seems that Rebels with O-320's don't stay
on wheels for very long :-) :-)

These settings, or slightly coarser pitch, seem to yield about 120 to
125 mph on wheels....

Brian Godden - do you have a Warp Drive ?? Anybody else out there on
wheels with more info ????

.....bobp

FWIW, Geert Frank's Rebel, with a stock (more or less :-) ) Subaru
Legacy and Ross re-drive, with a 3 blade (tapered) Warp Drive, gave
about 105 - 110 mph at 4,900 rpm ....

I talked to Geert. He is running about 11 degrees because of the
reduced power. At 14 degrees I am static running 5200 and cruising at
115 at 4600. No much comparison as I want to see what the LYc guys are
turning.

--
Dave Bangle http://www.subielyc.com/

Received: from [137.186.224.166] (helo=ms01-166.tor.istar.ca)
by mail4.toronto.istar.net with smtp (Exim 1.92 #2)
for murphy-rebel@dcsol.com
id 110S5v-0006U3-00; Sat, 3 Jul 1999 11:52:47 -0400
X-Sender: crs1188@inforamp.net
X-Mailer: Windows Eudora Light Version 1.5.2
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel Builders List)
From: Bob Patterson <bob.patterson@canrem.com>
Subject: Re: Warp drive blades
Message-Id: <E110S5v-0006U3-00@mail4.toronto.istar.net>
Date: Sat, 3 Jul 1999 11:52:47 -0400


Sounds like you're getting LOTS of power !! The O-320's seem to get in
the
120 - 125 mph range, at 2,450 rpm, in the 13 degree range, on wheels....

115 mph at 4,600 must give GREAT fuel economy, and sure isn't working
the engine hard !! I think we'll see more Subarus flying !!!!

....bobp
ps
I moved your reply to the top of the messages - it's much easier
to read & follow if you put your answers on top of the previous messages
....

--------------------------------orig.-------------------------------------
At 09:07 PM 7/1/99 -0700, you wrote:

I talked to Geert. He is running about 11 degrees because of the
reduced power. At 14 degrees I am static running 5200 and cruising at
115 at 4600. No much comparison as I want to see what the LYc guys are
turning.

--
Dave Bangle http://www.subielyc.com/

--------------------------------orig.---------------------------------------
----

Bob Patterson wrote:

I'm not running one, Dave, but I have flown several ....

Typical settings start in the 13 degree range, and yield about 108 to
110 mph cruise at 2,450 rpm - all this on amphib floats, so may not be

much

help for you in comparison. It seems that Rebels with O-320's don't stay
on wheels for very long :-) :-)

These settings, or slightly coarser pitch, seem to yield about 120

to

125 mph on wheels....

Brian Godden - do you have a Warp Drive ?? Anybody else out there

on

wheels with more info ????

.....bobp

FWIW, Geert Frank's Rebel, with a stock (more or less :-) ) Subaru
Legacy and Ross re-drive, with a 3 blade (tapered) Warp Drive, gave
about 105 - 110 mph at 4,900 rpm ....

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Received: from [137.186.224.166] (helo=ms01-166.tor.istar.ca)
by mail4.toronto.istar.net with smtp (Exim 1.92 #2)
for murphy-rebel@dcsol.com
id 110S8j-0006by-00; Sat, 3 Jul 1999 11:55:41 -0400
X-Sender: crs1188@inforamp.net
X-Mailer: Windows Eudora Light Version 1.5.2
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: <murphy-rebel@dcsol.com> (Murphy Rebel Builders List)
From: Bob Patterson <bob.patterson@canrem.com>
Subject: Re: Warp drive blades
Message-Id: <E110S8j-0006by-00@mail4.toronto.istar.net>
Date: Sat, 3 Jul 1999 11:55:41 -0400


Will try to get some static numbers from the guys here .....

.....bobp

---------------------------orig.----------------------------------------
At 08:59 PM 7/1/99 -0700, you wrote:

What I am really looking for is what static max RPM the 0320 guys get
and what pitch setting. Cruise speeds and RPMs will vary with each
airplane. I get 115 indicated with 4600 and 14 degrees but it doesn't
give me anything to compare unless I get some static numbers full
throttle. Then I can adjust to same pitch and compare. Thanks all.
--
Dave Bangle http://www.subielyc.com/
*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*

Received: from enaila.nidlink.com (root@enaila.nidlink.com [216.18.128.8])
by lanfear.nidlink.com (8.9.0/8.9.0) with ESMTP id VAA23873
for <murphy-rebel@dcsol.com>; Sat, 3 Jul 1999 21:24:45 -0700 (PDT)
Received: from nidlink.com (pm5-32.nidlink.com [216.18.141.39])
by enaila.nidlink.com (8.9.0/8.9.0) with ESMTP id VAA06962
for <murphy-rebel@dcsol.com>; Sat, 3 Jul 1999 21:24:43 -0700 (PDT)
Message-ID: <377EE42A.1E50D7C6@nidlink.com>
Date: Sat, 03 Jul 1999 21:33:46 -0700
From: subersys <subersys@nidlink.com>
X-Mailer: Mozilla 4.5 [en] (Win95; I)
X-Accept-Language: en
MIME-Version: 1.0
To: " (Murphy Rebel Builders List)" <murphy-rebel@dcsol.com>
Subject: Re: Warp drive blades
References: <E110S8j-0006by-00@mail4.toronto.istar.net>
Content-Type: text/plain; charset=x-user-defined
Content-Transfer-Encoding: 7bit

Bob Patterson wrote:

Will try to get some static numbers from the guys here .....

.....bobp

Thanks Bob. I am not satisfied with the power yet. Yea, it works
okay. I would like you to fly it at Oshkosh just for grins.

--
Dave Bangle http://www.subielyc.com/

Does anyone know if warp drive has a web site and if so what it is or phone
number as last resort

mike#007r


*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Mike;

Try 1-800-833-9357 US and Canada toll free or 515-357-6000 for Warp Drive.


-----Original Message-----
From: Mike Jones <Mike.Jones@agra.com>
To: Murphy-rebel@dcsol.com <Murphy-rebel@dcsol.com>
Date: Monday, February 21, 2000 2:07 PM
Subject: warp drive blades

Does anyone know if warp drive has a web site and if so what it is or phone
number as last resort

mike#007r


*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*

*----------------------------------------------------*
The Murphy Rebel Builders List is for the discussion
between builders and owners of Murphy Rebel aircraft.
Archives located at:
http://www.dcsol.com/murphy-rebel/lists/default.htm
*----------------------------------------------------*




-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------