moose and SR

[Wayne G. O'Shea]

SR2500 ....063 stringer....020 main wings skins (top/bottom) and .032
leading edge skin. The Moose has some .063 doubler "plates" over top of the
skins to beef up the wing to the 3500lb gross with the main piece going from
the front pickup/spar back to a stringer behind the main spar and then
staggering a rivet line smaller as it works it's way out to the lift strut
area.

Wayne

----- Original Message -----
From: "Gilles St-Pierre" <ranchlaseigneurie@hotmail.com>
To: <murphy-rebel@dcsol.com>
Sent: Friday, February 27, 2004 2:48 PM
Subject: moose and SR

can anyone tell me what is the thickness fo the stringers and skin used

for

the wings for these aircrafts

thanks

gilles e717>

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*

http://join.msn.com/?page=features/viru ... %2f%2fjoin
.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Gilles St-Pierre]

can anyone tell me what is the thickness fo the stringers and skin used for
the wings for these aircrafts

thanks

gilles e717>

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/viru ... et%3den-ca



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Gilles St-Pierre]

Hi Wayne

thanks for your answer about the strirngers and skin thickness info, but
it hard to picture how that doubling for reinforcement is made, is there a
place where i could see pictures of it

thanks again
gilles e717

From: "Gilles St-Pierre" <ranchlaseigneurie@hotmail.com>
Reply-To: <murphy-rebel@dcsol.com>
To: murphy-rebel@dcsol.com
Subject: moose and SR
Date: Fri, 27 Feb 2004 15:48:04 -0400

can anyone tell me what is the thickness fo the stringers and skin used for
the wings for these aircrafts

thanks

gilles e717>

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/viru ... et%3den-ca



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

_________________________________________________________________
MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*.
http://join.msn.com/?page=features/viru ... et%3den-ca



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Gilles St-Pierre]

Hi Wayne

thanks for your answer about the strirngers and skin thickness info, but
it hard to picture how that doubling for reinforcement is made, is there a
place where i could see pictures of it

thanks again
gilles e717

From: "Gilles St-Pierre" <ranchlaseigneurie@hotmail.com>
Reply-To: <murphy-rebel@dcsol.com>
To: murphy-rebel@dcsol.com
Subject: moose and SR
Date: Fri, 27 Feb 2004 15:48:04 -0400

can anyone tell me what is the thickness fo the stringers and skin used for
the wings for these aircrafts

thanks

gilles e717>

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*
http://join.msn.com/?page=features/viru ... et%3den-ca



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=dept/bcomm&pg ... et%3den-ca



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------