The Murphy Builders Site

Bob, you can use anything you can find from say a couple of toboggans to
your neighbours Federal 1500's quietly borrowed in the middle of the night!
Pop the wheel off, make an adapter bushing to go from your axle diameter to
ski pedestal diameter. Hook up some check cables and go for it.

Perfect size for straight skis with the snow we get around here would be
1500's with a 12" wide base (ie 2000's really)

No need for a tail ski on the Rebel! You can lift the tail standing still
with prop wash and forward stick.

You have 4 days to accomlplish this task!

Wayne

----- Original Message -----
From: "Bob Fisher" <rgfisher@zeuter.com>
To: <murphy-rebel@dcsol.com>
Sent: Tuesday, February 10, 2004 8:39 PM
Subject: Re: Midland/Penetang Ski Flyin UPDATE

hi wayne how big are the skis for the rebel -- approximate

dimensions?

is there a tail wheel ski also?

bob fisher

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------