The Murphy Builders Site

I found a squeezer with both flat setting heads and dimpling heads to be
worthwhile. The dimple heads are for both 3/32 and 1/8 with 120 degree
included angle required for the pulled rivets and the 3/32 100 degree
for squeezed solid rivets for nut plates.

Can't ever have too many tools.
Ralph Baker


*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://www.dcsol.com/default.htm
Archives public username "rebel" password "builder"
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------