fuel tank sump drain
Posted: Fri Feb 17, 2012 4:20 pm
Received: from JimsRebel@aol.com
by imo13.mx.aol.com (IMOv12/Dec1997) id GNEUa29148
for <murphy-rebel@dcsol.com>; Wed, 4 Feb 1998 20:50:26 -0500 (EST)
From: JimsRebel@aol.com
Message-ID: <b3e5be3.34d91ae4@aol.com>
Date: Wed, 4 Feb 1998 20:50:26 EST
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: fuel tank sump drain
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 3.0 for Windows 95 sub 49
After reviewing my notes in the fuel tank assembly chapter, the directions
don't include the sump drain (CAV-110 & W-159). The part is included in the
kit but not addressed in the manual. This must go on the bottom of the skin,
lower in-board corner. W-159 must be rivetted to the bottom of the skin to
allow the sump to drain properly. Also be sure to vent the tanks with RAM
air
as per Murphy's new system of using a vent on top of the cabin ,,( same as
C170 and C180 ) . Detail of the new ram air vent are at Murphy's WEB site
under TECH area .... Jim LePard, Rebel 254
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------
by imo13.mx.aol.com (IMOv12/Dec1997) id GNEUa29148
for <murphy-rebel@dcsol.com>; Wed, 4 Feb 1998 20:50:26 -0500 (EST)
From: JimsRebel@aol.com
Message-ID: <b3e5be3.34d91ae4@aol.com>
Date: Wed, 4 Feb 1998 20:50:26 EST
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: fuel tank sump drain
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 3.0 for Windows 95 sub 49
After reviewing my notes in the fuel tank assembly chapter, the directions
don't include the sump drain (CAV-110 & W-159). The part is included in the
kit but not addressed in the manual. This must go on the bottom of the skin,
lower in-board corner. W-159 must be rivetted to the bottom of the skin to
allow the sump to drain properly. Also be sure to vent the tanks with RAM
air
as per Murphy's new system of using a vent on top of the cabin ,,( same as
C170 and C180 ) . Detail of the new ram air vent are at Murphy's WEB site
under TECH area .... Jim LePard, Rebel 254
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------