SR/Moose Service bulletin 9 rivets.
Posted: Fri Feb 17, 2012 11:58 pm
-----Original Message-----From Brian and MAM:
From: Brian Godden [mailto:murtech@murphyair.com]
Sent: Monday, November 03, 2003 9:24 AM
To: Scott & Leere' Aldrich
Subject: Re: SR/Moose Service bulletin 9 rivets.
Hi Scott,
If you read it together with para 25, you will see that the nine rivet
pattern is required at the center AND where the bulkhead overlaps the
upright. It is this latter joint where we found the rivets missing.
Regards
Brian Godden
Murphy Aircraft Mfg. Ltd.
bgodden@murphyair.com
----- Original Message -----
From: "Scott & Leere' Aldrich" <flynski@mwutah.com>
To: "Murphy Technical Department" <murtech@murphyair.com>
Sent: Monday, November 03, 2003 4:57 AM
Subject: SR/Moose Service bulletin 9 rivets.
*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
https://www.dcsol.com/public/code/html-subscribe.wcx
Archives located at https://rebel:builder@www.dcsol.com/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*
-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------