The Murphy Builders Site

I'm sure most will tell you here to make them removable
with rivnuts or some kind of anchor nuts with screws.
However, in my case, by the time I got to attaching my
wing tips, I decided I had sufficient practice and
skills at drilling out rivets, so I just went the quick
and easy route, and riveted them on. So far no regrets.

Walter

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Murray and Carol Cherkas
Sent: Sunday, August 17, 2003 8:41 PM
To: murphy-rebel@dcsol.com
Subject: wing tip attach


Hello All

What is the best way to install wing tips?
Of course I have already drilled
all the holes as shown for riveting.I've
also got wingtip lights which may
require removing the tips at some point in
time.Should I use self tapping
screws? To rivet floating riv nuts would be
a big job,clip nuts may work for
one wing but the flange on the other is the
wrong way.

Advise me please.

Thanks
Murray



*--------------------------------------------
-----------------------------*
To unsubscribe from this list go to:

http://www.dcsol.com:81/public/code/html-subs
cribe.wcx
Archives located at
http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail
mike.davis@dcsol.com
*--------------------------------------------
-----------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Hello All

What is the best way to install wing tips? Of course I have already drilled
all the holes as shown for riveting.I've also got wingtip lights which may
require removing the tips at some point in time.Should I use self tapping
screws? To rivet floating riv nuts would be a big job,clip nuts may work for
one wing but the flange on the other is the wrong way.

Advise me please.

Thanks
Murray



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Thanks W&W (Wayne,Walter-Walter,Wayne)Go figure

Thanks for confirming the alternatives. Will let you know after it happens.

Murray

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Sunday, August 17, 2003 7:45 PM
To: murphy-rebel@dcsol.com
Subject: Re: wing tip attach


Murray, clip nuts CAN be used on both wings. One wing you can clip over the
flange and rib from the outside and on the other wing you have to slide them
between the wing skin and the rib flange from inside the wing. You can also
use sheet metal screws. #8 in a #40 hole and big ugly #10's if you have
already drilled to #30 for rivets.

Cheers,
Wayne

----- Original Message -----
From: "Murray and Carol Cherkas" <cherkas@shaw.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, August 17, 2003 11:41 PM
Subject: wing tip attach

Hello All

What is the best way to install wing tips? Of course I have already

drilled

all the holes as shown for riveting.I've also got wingtip lights which may
require removing the tips at some point in time.Should I use self tapping
screws? To rivet floating riv nuts would be a big job,clip nuts may work

for

one wing but the flange on the other is the wrong way.

Advise me please.

Thanks
Murray

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*





*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Murray, clip nuts CAN be used on both wings. One wing you can clip over the
flange and rib from the outside and on the other wing you have to slide them
between the wing skin and the rib flange from inside the wing. You can also
use sheet metal screws. #8 in a #40 hole and big ugly #10's if you have
already drilled to #30 for rivets.

Cheers,
Wayne

----- Original Message -----
From: "Murray and Carol Cherkas" <cherkas@shaw.ca>
To: <murphy-rebel@dcsol.com>
Sent: Sunday, August 17, 2003 11:41 PM
Subject: wing tip attach

Hello All

What is the best way to install wing tips? Of course I have already

drilled

all the holes as shown for riveting.I've also got wingtip lights which may
require removing the tips at some point in time.Should I use self tapping
screws? To rivet floating riv nuts would be a big job,clip nuts may work

for

one wing but the flange on the other is the wrong way.

Advise me please.

Thanks
Murray

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------