Moose Elevator Ballance

[Reed, Britt/FSC Salt Lake]

How important is it to get the elevator ballanced at the hinge point - I
just hung mine up and it needs at least double the weight that was supplied.
The only reference I see in the archives is for an Elite and Jeffery
Steenson says "It's cool to watch the elevator balanced like the scales of
Mother Justice!"

I think that the original 2500 design has had lots of stuff added to beef up
for the Moose and no retro thought towards the tip weights - I did notice an
access plate cut into the factory demo - maybe to add weight?

Thanks again -

Britt SR194


*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

[Al & Deb Paxhia]

I recall that MAM required 50% of the weight on the horn, we did ours to
about 75%. I did not rebalance the elevator after adding the 3500 mods.
Al
Moose, 526AP
----- Original Message -----
From: "Reed, Britt/FSC Salt Lake" <BReed@slcrail.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, June 11, 2003 9:09 AM
Subject: Moose Elevator Ballance

How important is it to get the elevator ballanced at the hinge point - I
just hung mine up and it needs at least double the weight that was

supplied.

The only reference I see in the archives is for an Elite and Jeffery
Steenson says "It's cool to watch the elevator balanced like the scales of
Mother Justice!"

I think that the original 2500 design has had lots of stuff added to beef

up

for the Moose and no retro thought towards the tip weights - I did notice

an

access plate cut into the factory demo - maybe to add weight?

Thanks again -

Britt SR194

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*




*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------