The Murphy Builders Site

I'd appreciate advice on the extent of completion of the elevator when
you establish the weight of the balance weights. It's not clear from my
instructions whether the tip skins are (partially) in place or not,
since at no point in the instructions do they appear to mention riveting
these skins. It sort of looks like the elevator should be complete and
riveted closed with the trim tab and servo in place, but with only the
tip ribs in place, and no tip skins, but that's just my best guess.

Al Hepburn

Elite 587



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Dear Alan,

I was worried about the need to adjust the weights too, but I just followed
the manual, installed the weights, and closed out the skins, and it all came
out perfectly. It's cool to watch the elevator balanced like the scales of
Mother Justice!

Jeffrey Steenson
Elite 714

----- Original Message -----
From: "Alan Hepburn" <ahepburn@renc.igs.net>
To: <murphy-rebel@dcsol.com>
Sent: Saturday, May 10, 2003 8:54 PM
Subject: Eliter Elevator Tip Weight

I'd appreciate advice on the extent of completion of the elevator when
you establish the weight of the balance weights. It's not clear from my
instructions whether the tip skins are (partially) in place or not,
since at no point in the instructions do they appear to mention riveting
these skins. It sort of looks like the elevator should be complete and
riveted closed with the trim tab and servo in place, but with only the
tip ribs in place, and no tip skins, but that's just my best guess.

Al Hepburn

Elite 587

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*



*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*








-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------