The Murphy Builders Site

Date: Mon, 01 Feb 1999 09:38:31 -0500
From: "Michael J.Dowhan" <michael.dowhan@pwc.ca>
Subject: Rebel floor Fus 39
Sender: Michael.Dowhan@pwc.ca
To: "murphy-rebel@dcsol.COM" <murphy-rebel@dcsol.COM>
Organization: Advanced Design Mississauga
MIME-version: 1.0
X-Mailer: Mozilla 4.05 [en] (X11; I; HP-UX B.10.20 9000/715)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7bit
Message-Id: <14394848403658@dcsol.com>

Hi Rebel Builders,
Have a question. I am working on the cabin floor area and
find that my cabin floor fus 39 panel does not look like the
manual. It does not have the flanges on the edges, has
anyone else seen this - has the design changed. What did
others do in this area.
Mike Dowhan Rebel 392

Received: from RebelAir@aol.com
by imo22.mx.aol.com (IMOv18.1) id 1DDRa01433
for <murphy-rebel@dcsol.com>; Mon, 1 Feb 1999 14:37:40 -0500 (EST)
From: RebelAir@aol.com
Message-ID: <b8b1ebde.36b60284@aol.com>
Date: Mon, 1 Feb 1999 14:37:40 EST
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Re: Rebel floor Fus 39
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 3.0.i for Windows 95 sub 19

Hi There

Dan is correct, the floor ahead of the main cage which is a trapezoid shape,
and also very heavy has 2 flanges on the pilot and copilot sides. All
others
do not.

Brian #328R

Received: from RebelAir@aol.com
by imo28.mx.aol.com (IMOv18.1) id LOROa23173
for <murphy-rebel@dcsol.com>; Mon, 1 Feb 1999 14:35:44 -0500 (EST)
From: RebelAir@aol.com
Message-ID: <81fef8dd.36b60210@aol.com>
Date: Mon, 1 Feb 1999 14:35:44 EST
To: murphy-rebel@dcsol.com
Mime-Version: 1.0
Subject: Re: Rebel floor Fus 39
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
X-Mailer: AOL 3.0.i for Windows 95 sub 19

Hi There

As I recall, none of the inner or outer cabin floor pieces have flanges of
any
sort. I am quite sure about this. Also, there are very few holes drilled
in
these pieces as well. Have to 'free form' quite a bit.

For your info, many of the builders have made the inner floor of stronger
material considering all of the wear and tear etc. in the cabin.

Brian #328R



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Received: from the-benson-s (209-122-196-251.s251.tnt5.lnh.md.dialup.rcn.com
[209.122.196.251])
by smtp1.erols.com (8.8.8/8.8.5) with SMTP id WAA06784
for <murphy-rebel@dcsol.com>; Mon, 1 Feb 1999 22:47:59 -0500 (EST)
Message-ID: <002e01be4e5e$764861a0$fbc47ad1@the-benson-s>
From: "Lonnie Benson" <lonben@erols.com>
To: "Murphy Rebel" <murphy-rebel@dcsol.com>
Subject: Re: Rebel floor Fus 39
Date: Mon, 1 Feb 1999 22:45:14 -0500
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3155.0
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0

Mike:

My FUS-39 which is just in front of bulkhead A on the bottom of fuselage
does have flanges on the outer edges. The piece in front of FUS-39 does not
have flanges on the sides.

-----Original Message-----
From: Michael J.Dowhan <michael.dowhan@pwc.ca>
To: murphy-rebel@dcsol.COM <murphy-rebel@dcsol.com>
Date: Monday, February 01, 1999 9:39 AM
Subject: Rebel floor Fus 39

Hi Rebel Builders,
Have a question. I am working on the cabin floor area and
find that my cabin floor fus 39 panel does not look like the
manual. It does not have the flanges on the edges, has
anyone else seen this - has the design changed. What did
others do in this area.
Mike Dowhan Rebel 392

.





-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------