The Murphy Builders Site

Posted: **Fri Feb 17, 2012 10:52 pm**

MAM has a leprechaun sale going on for the rest of march!!

"Luck of the Irish Sale"

With a name like Murphy, you have but to smile during March and Saint
Patrick's Day. With a name like Murphy Aircraft, you can smile or you can
put some green back where it belongs - in your pockets! The mischievous
spirit of the leprechaun has struck at Murphy Aircraft, creating a "pot of
gold" for you at the end of the rainbow.

Yes, to celebrate the luck of the Irish, Murphy Aircraft is dropping
the prices and keeping you in the green. But hurry, March doesn't last
forever, nor will this sale, so act today and call Colleen at 604-792-5855
to capture yourself a little piece of leprechaun spirit!

Kit Aircraft.................................Regular
Price...................................March's Price

Renegade Spirit...............................$ 15,000
USD..........................$ 12,750 USD
Murphy Rebel...................................$ 15,500
USD..........................$ 13,950 USD
Murphy Elite......................................$ 21,000
USD..........................$ 17,850 USD
Murphy Maverick...............................$ 13,500
USD..........................$ 11,475 USD
Hurry though, March comes but only once a year, and deals like these
even less!

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

Well, I bit the bullet and bought one of the MAM's pre assembled 1800 amphib
float kits. I took Wayne's comments to hart, about working for $8.00 an hour
to assemble them, then decided my time was worth more than that. I don't plan
on using them for another year but figured it was worth buying now at that
great price.

Maybe I'll miss building so much by then I'll be ready to go back to work in
the shop.

Bruce 357R

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

Bruce, what was the delivery timing? Ready to go or wait from factory
moving? Don't forget to take the wheel assemblies apart and get some method
of permalube to the axle bearings. Heard another method the other day of
putting a piece of PVC pipe across between the bearing mounts, with the ends
turned down in a lathe so they sit tightly in the opening in each wheel
half, so you are only filling the area between the tube and the axle and not
the entire wheel.

Wayne

----- Original Message -----
From: <Legeorgen@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 8:02 PM
Subject: Re: Any lurking kit buyers take note!!

Well, I bit the bullet and bought one of the MAM's pre assembled 1800

amphib

float kits. I took Wayne's comments to hart, about working for $8.00 an

hour

to assemble them, then decided my time was worth more than that. I don't

plan

on using them for another year but figured it was worth buying now at that
great price.

Maybe I'll miss building so much by then I'll be ready to go back to work

in

the shop.

Bruce 357R

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

Have they lowered the price as part of the March sale ??

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Legeorgen@aol.com
Sent: Wednesday, March 19, 2003 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

Well, I bit the bullet and bought one of the MAM's pre assembled 1800 amphib
float kits. I took Wayne's comments to hart, about working for $8.00 an hour
to assemble them, then decided my time was worth more than that. I don't
plan
on using them for another year but figured it was worth buying now at that
great price.

Maybe I'll miss building so much by then I'll be ready to go back to work in
the shop.

Bruce 357R

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

Wayne,
The floats are already made and MAM wants me to come get them (I'm in
Spokane, not a long drive) no later than four weeks. They had five sets
taking up room in their shop and wanted to move them out for more SR stuff
being shipped in. MAM has one set left if anyone one is ready.

I'll have to go back and read up in the archives when it's time to start
attaching them to the Rebel. I didn't not pay a lot of attention during the
plane construction as I had plenty on my plate at the time. I will be sure to
follow your advice and thanks again for your experience and input to this
endeavor.

Bruce 357R

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

That's great, Bruce, we need some more Rebels on floats
out here in the Northwest. You've got lots of time
before summer to get them ready to fly.

Another thing to watch for is which suspension pucks
they gave you. They might have it right by now, but
they didn't with mine just over a year ago.

Walter

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, March 19, 2003 5:09 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

Bruce, what was the delivery timing? Ready
to go or wait from factory
moving? Don't forget to take the wheel
assemblies apart and get some method
of permalube to the axle bearings. Heard
another method the other day of
putting a piece of PVC pipe across between
the bearing mounts, with the ends
turned down in a lathe so they sit tightly
in the opening in each wheel
half, so you are only filling the area
between the tube and the axle and not
the entire wheel.

Wayne

----- Original Message -----
From: <Legeorgen@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 8:02 PM
Subject: Re: Any lurking kit buyers take note!!

Well, I bit the bullet and bought one of
the MAM's pre assembled 1800
amphib
float kits. I took Wayne's comments to
hart, about working for $8.00 an
hour
to assemble them, then decided my time was
worth more than that. I don't
plan
on using them for another year but figured
it was worth buying now at that
great price.

Maybe I'll miss building so much by then
I'll be ready to go back to work
in
the shop.

Bruce 357R

*--------------------------------------------
-----------------------------*
To unsubscribe from this list go to:

http://www.dcsol.com:81/public/code/html-subscribe.wcx

Archives located at

http://rebel:builder@www.dcsol.com:81/default.htm

To contact the list admin, e-mail

mike.davis@dcsol.com
*------------------------------------------------------
-------------------*

*------------------------------------------------------
-------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at
http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*------------------------------------------------------
-------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

The original pucks were too soft, which allowed the
suspension to bottom out too easily. They have new ones
now, and if they aren't installed in yours, I am sure
MAM will give you a set if you ask. When you're ready
to mount them on the plane, let us know on the list,
and we'll be happy to help you out. I still remember
and appreciate all the help I got from everyone.

Yes, looks like they went for an "opportunity strike".
Sure would be great if they got him, but I don't think
it will be that easy. I certainly do support the US and
Brits in what they are doing to try and rid this world
of terrorism.

Walter

-----Original Message-----
From: mike.davis@dcsol.com
[mailto:mike.davis@dcsol.com]On Behalf Of
legeorgen@aol.com
Sent: Wednesday, March 19, 2003 8:48 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

Hi Walter,

I'll not mount the floats until next winter.
You will have to see my Rebel,
this summers at Arlington, on wheels. Tell
me more about the suspension
pucks. I'm sure I can still make request
from MAM. I still have to get a
seaplane rating.

It appears the war with Iraq has begun. I
hope it does not last long. It's
time for the Iraqi mad man to go. I support
our President and troops
entirely.

Bruce 357R

*--------------------------------------------
-----------------------------*
To unsubscribe from this list go to:

http://www.dcsol.com:81/public/code/html-subs
cribe.wcx
Archives located at

http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*------------------------------------------------------
-------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

Keith, they went on sale over a month ago and a flyer was sent out to just
about every Rebel builder or even people that expressed an interest in MAM's
products. Was only five sets and Bruce says only one set left now. Pricing
completed was $18,500US and now only $14,900 US on these sets only.
Wayne

----- Original Message -----
From: "Keith Oliver" <kboliver@adelphia.net>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 8:19 PM
Subject: RE: Any lurking kit buyers take note!!

Have they lowered the price as part of the March sale ??

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Legeorgen@aol.com
Sent: Wednesday, March 19, 2003 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

Well, I bit the bullet and bought one of the MAM's pre assembled 1800

amphib

float kits. I took Wayne's comments to hart, about working for $8.00 an

hour

to assemble them, then decided my time was worth more than that. I don't
plan
on using them for another year but figured it was worth buying now at that
great price.

Maybe I'll miss building so much by then I'll be ready to go back to work

in

the shop.

Bruce 357R

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

You should have headed up there today Bruce! Border traffic may come to a
halt really quickly, especially seeing that our PM's not backing the
inevitable that's going to start come sun up in Iraq tomorrow morning.

Wayne

----- Original Message -----
From: <Legeorgen@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 8:26 PM
Subject: Re: Any lurking kit buyers take note!!

Wayne,
The floats are already made and MAM wants me to come get them (I'm in
Spokane, not a long drive) no later than four weeks. They had five sets
taking up room in their shop and wanted to move them out for more SR stuff
being shipped in. MAM has one set left if anyone one is ready.

I'll have to go back and read up in the archives when it's time to start
attaching them to the Rebel. I didn't not pay a lot of attention during

the

plane construction as I had plenty on my plate at the time. I will be sure

to

follow your advice and thanks again for your experience and input to this
endeavor.

Bruce 357R

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

And that price also includes all the mounting gear!!

----- Original Message -----
From: "Wayne G. O'Shea" <oifa@irishfield.on.ca>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 9:17 PM
Subject: Re: Any lurking kit buyers take note!!

Keith, they went on sale over a month ago and a flyer was sent out to just
about every Rebel builder or even people that expressed an interest in

MAM's

products. Was only five sets and Bruce says only one set left now. Pricing
completed was $18,500US and now only $14,900 US on these sets only.
Wayne

----- Original Message -----
From: "Keith Oliver" <kboliver@adelphia.net>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 8:19 PM
Subject: RE: Any lurking kit buyers take note!!

Have they lowered the price as part of the March sale ??

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Legeorgen@aol.com
Sent: Wednesday, March 19, 2003 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

Well, I bit the bullet and bought one of the MAM's pre assembled 1800
amphib
float kits. I took Wayne's comments to hart, about working for $8.00 an
hour
to assemble them, then decided my time was worth more than that. I don't
plan
on using them for another year but figured it was worth buying now at

that

great price.

Maybe I'll miss building so much by then I'll be ready to go back to

work

in
the shop.

Bruce 357R

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

Missed it !!

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, March 19, 2003 9:18 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

Keith, they went on sale over a month ago and a flyer was sent out to just
about every Rebel builder or even people that expressed an interest in MAM's
products. Was only five sets and Bruce says only one set left now. Pricing
completed was $18,500US and now only $14,900 US on these sets only.
Wayne

----- Original Message -----
From: "Keith Oliver" <kboliver@adelphia.net>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 8:19 PM
Subject: RE: Any lurking kit buyers take note!!

Have they lowered the price as part of the March sale ??

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Legeorgen@aol.com
Sent: Wednesday, March 19, 2003 8:02 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

Well, I bit the bullet and bought one of the MAM's pre assembled 1800

amphib

float kits. I took Wayne's comments to hart, about working for $8.00 an

hour

to assemble them, then decided my time was worth more than that. I don't
plan
on using them for another year but figured it was worth buying now at that
great price.

Maybe I'll miss building so much by then I'll be ready to go back to work

in

the shop.

Bruce 357R

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

Too Late
The game's a-foot

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, March 19, 2003 9:21 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

You should have headed up there today Bruce! Border traffic may come to a
halt really quickly, especially seeing that our PM's not backing the
inevitable that's going to start come sun up in Iraq tomorrow morning.

Wayne

----- Original Message -----
From: <Legeorgen@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 8:26 PM
Subject: Re: Any lurking kit buyers take note!!

Wayne,
The floats are already made and MAM wants me to come get them (I'm in
Spokane, not a long drive) no later than four weeks. They had five sets
taking up room in their shop and wanted to move them out for more SR stuff
being shipped in. MAM has one set left if anyone one is ready.

I'll have to go back and read up in the archives when it's time to start
attaching them to the Rebel. I didn't not pay a lot of attention during

the

plane construction as I had plenty on my plate at the time. I will be sure

to

follow your advice and thanks again for your experience and input to this
endeavor.

Bruce 357R

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

I was pretty close! It's 6AM in Iraq and the sun is coming up very shortly!!

----- Original Message -----
From: "Keith Oliver" <kboliver@adelphia.net>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 10:00 PM
Subject: RE: Any lurking kit buyers take note!!

Too Late
The game's a-foot

Keith Oliver
Elite #654 TD
N654ME (reserved)
Farmingdale, Maine

-----Original Message-----
From: mike.davis@dcsol.com [mailto:mike.davis@dcsol.com]On Behalf Of
Wayne G. O'Shea
Sent: Wednesday, March 19, 2003 9:21 PM
To: murphy-rebel@dcsol.com
Subject: Re: Any lurking kit buyers take note!!

You should have headed up there today Bruce! Border traffic may come to a
halt really quickly, especially seeing that our PM's not backing the
inevitable that's going to start come sun up in Iraq tomorrow morning.

Wayne

----- Original Message -----
From: <Legeorgen@aol.com>
To: <murphy-rebel@dcsol.com>
Sent: Wednesday, March 19, 2003 8:26 PM
Subject: Re: Any lurking kit buyers take note!!

Wayne,
The floats are already made and MAM wants me to come get them (I'm in
Spokane, not a long drive) no later than four weeks. They had five sets
taking up room in their shop and wanted to move them out for more SR

stuff

being shipped in. MAM has one set left if anyone one is ready.

I'll have to go back and read up in the archives when it's time to start
attaching them to the Rebel. I didn't not pay a lot of attention during
the
plane construction as I had plenty on my plate at the time. I will be

sure

to
follow your advice and thanks again for your experience and input to

this

endeavor.

Bruce 357R

*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*
*-------------------------------------------------------------------------*

To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com

*-------------------------------------------------------------------------*

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 10:52 pm**

Hi Walter,

I'll not mount the floats until next winter. You will have to see my Rebel,
this summers at Arlington, on wheels. Tell me more about the suspension
pucks. I'm sure I can still make request from MAM. I still have to get a
seaplane rating.

It appears the war with Iraq has begun. I hope it does not last long. It's
time for the Iraqi mad man to go. I support our President and troops
entirely.

Bruce 357R

*-------------------------------------------------------------------------*
To unsubscribe from this list go to:
http://www.dcsol.com:81/public/code/html-subscribe.wcx
Archives located at http://rebel:builder@www.dcsol.com:81/default.htm
To contact the list admin, e-mail mike.davis@dcsol.com
*-------------------------------------------------------------------------*

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------