The Murphy Builders Site

Posted: **Fri Feb 17, 2012 4:52 pm**

Received: from [206.40.137.199] by woodinville.netos.com
(Post.Office MTA v3.1.2 release (PO205-101c)
ID# 0-38159U2500L250S0) with ESMTP id AAA69;
Sun, 10 Jan 1999 23:51:17 -0800
X-Mailer: Microsoft Outlook Express Macintosh Edition - 4.5 (0410)
Date: Sun, 10 Jan 1999 23:51:46 -0800
Subject: cabin roof bulkhead brackets
From: "Dan Morehouse" <dan.morehouse@netos.com>
To: "murphy-rebel @dcsol.com" <murphy-rebel @dcsol.com>
CC: "murtech@murphyair.com" <murtech@murphyair.com>
Mime-version: 1.0
X-Priority: 3
Content-type: text/plain; charset="US-ASCII"
Content-transfer-encoding: 7bit
Message-ID: <19990111075116603.AAA69@[206.40.137.199]>

Hello!

Square bulkheads are used for 'F' and 'G' to support the cabin roof. Angle
material (ST40?) is used to make 4 Fus 53s to bridge the gap preformed in
the quarter bulkheads. Why do we do it only on these two bulkheads?

The angle bracket material sticks out a bit past the edge of the flange of
the bulkhead. Can this be trimmed flush?

Thanks,
Dan
R280

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 4:52 pm**

Received: from the-benson-s (209-122-252-160.s414.tnt1.lnh.md.dialup.rcn.com
[209.122.252.160])
by smtp1.erols.com (8.8.8/8.8.5) with SMTP id HAA15320
for <murphy-rebel@dcsol.com>; Thu, 14 Jan 1999 07:37:20 -0500 (EST)
Message-ID: <002a01be3fba$8ec20720$a0fc7ad1@the-benson-s>
From: "Lonnie Benson" <lonben@erols.com>
To: "Murphy Rebel" <murphy-rebel@dcsol.com>
Subject: Re: cabin roof bulkhead brackets
Date: Thu, 14 Jan 1999 07:36:49 -0500
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3155.0
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0

Dan:

Did you get an answer from MAM on this? The Fus 53's are used to add extra
strength to the rear wing carrythroughs. I did not bother to trim my
brackets, but can see no reason not to.

-----Original Message-----
From: Dan Morehouse <dan.morehouse@netos.com>
To: murphy-rebel @dcsol.com <murphy-rebel@dcsol.com>
Cc: murtech@murphyair.com <murtech@murphyair.com>
Date: Monday, January 11, 1999 2:52 AM
Subject: cabin roof bulkhead brackets

Hello!

Square bulkheads are used for 'F' and 'G' to support the cabin roof. Angle
material (ST40?) is used to make 4 Fus 53s to bridge the gap preformed in
the quarter bulkheads. Why do we do it only on these two bulkheads?

The angle bracket material sticks out a bit past the edge of the flange of
the bulkhead. Can this be trimmed flush?

Thanks,
Dan
R280

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Posted: **Fri Feb 17, 2012 4:53 pm**

Received: from [206.40.137.199] by woodinville.netos.com
(Post.Office MTA v3.1.2 release (PO205-101c)
ID# 0-38159U2500L250S0) with ESMTP id AAA169
for <murphy-rebel@dcsol.com>; Thu, 14 Jan 1999 07:56:25 -0800
X-Mailer: Microsoft Outlook Express Macintosh Edition - 4.5 (0410)
Date: Thu, 14 Jan 1999 07:56:21 -0800
Subject: Re: cabin roof bulkhead brackets
From: "Dan Morehouse" <dan.morehouse@netos.com>
To: "(Murphy Rebel)" <murphy-rebel@dcsol.com>
Mime-version: 1.0
X-Priority: 3
Content-type: text/plain; charset="US-ASCII"
Content-transfer-encoding: 7bit
Message-ID: <19990114155625492.AAA169@[206.40.137.199]>

Not yet. I'll post it when/if I get one. Thanks for the feedback.

Take care,
Dan
R280

----------

From: "Lonnie Benson" <lonben@erols.com>
To: "Murphy Rebel" <murphy-rebel@dcsol.com>
Subject: Re: cabin roof bulkhead brackets
Date: Thu, Jan 14, 1999, 4:36 AM

Dan:

Did you get an answer from MAM on this? The Fus 53's are used to add

extra

strength to the rear wing carrythroughs. I did not bother to trim my
brackets, but can see no reason not to.

-----Original Message-----
From: Dan Morehouse <dan.morehouse@netos.com>
To: murphy-rebel @dcsol.com <murphy-rebel@dcsol.com>
Cc: murtech@murphyair.com <murtech@murphyair.com>
Date: Monday, January 11, 1999 2:52 AM
Subject: cabin roof bulkhead brackets

Hello!

Square bulkheads are used for 'F' and 'G' to support the cabin roof. Angle
material (ST40?) is used to make 4 Fus 53s to bridge the gap preformed in
the quarter bulkheads. Why do we do it only on these two bulkheads?

The angle bracket material sticks out a bit past the edge of the flange of
the bulkhead. Can this be trimmed flush?

Thanks,
Dan
R280

-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------