The Murphy Builders Site

Received: from [206.40.137.199] by woodinville.netos.com
(Post.Office MTA v3.1.2 release (PO205-101c)
ID# 0-38159U2500L250S0) with ESMTP id AAA185;
Sun, 10 Jan 1999 08:58:12 -0800
X-Mailer: Microsoft Outlook Express Macintosh Edition - 4.5 (0410)
Date: Sun, 10 Jan 1999 08:58:01 -0800
Subject: rear wing attach brackets
From: "Dan Morehouse" <dan.morehouse@netos.com>
To: "murphy-rebel @dcsol.com" <murphy-rebel @dcsol.com>
CC: "murtech@murphyair.com" <murtech@murphyair.com>
Mime-version: 1.0
X-Priority: 3
Content-type: text/plain; charset="US-ASCII"
Content-transfer-encoding: 7bit
Message-ID: <19990110165811412.AAA185@[206.40.137.199]>

Hello!

My manual (07/27/94) for the Rebel in fig 139 step 449 suggests drilling two
#30 holes 15/16" apart, 13/16" away from the end bolt hole. If I do this at
these points I get only 1/4" edge clearance. I could either leave them at
this position, space the holes closer (say 11/16" instead of 15/16"), or
drill them further away from the bolt hole (say 1" away instead of 13/16").

Will these holes be left at #30 for 1/8" rivets or are they to be enlarged
to #11 (as indicated in step 463?)?

Happy travels,
Dan
R280



-----------------------------------------------------------------
List archives located at: https://mail.dcsol.com/login
username "rebel" password "builder"
Unsubscribe: rebel-builders-unsubscribe@dcsol.com
List administrator: mike.davis@dcsol.com
-----------------------------------------------------------------

Received: from the-benson-s (209-122-252-160.s414.tnt1.lnh.md.dialup.rcn.com
[209.122.252.160])
by smtp1.erols.com (8.8.8/8.8.5) with SMTP id HAA14010
for <murphy-rebel@dcsol.com>; Thu, 14 Jan 1999 07:29:52 -0500 (EST)
Message-ID: <002501be3fb9$83960820$a0fc7ad1@the-benson-s>
From: "Lonnie Benson" <lonben@erols.com>
To: "Murphy Rebel" <murphy-rebel@dcsol.com>
Subject: Re: rear wing attach brackets
Date: Thu, 14 Jan 1999 07:29:20 -0500
MIME-Version: 1.0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.3155.0
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3155.0

Dan:

I have my two rear wing attachments bolted in place and still have the two
empty #30 holes. I have not as yet discovered any further reference to them
in my instructions. If you find out what we are supposed to do with them
let me know.

-----Original Message-----
From: Dan Morehouse <dan.morehouse@netos.com>
To: murphy-rebel @dcsol.com <murphy-rebel@dcsol.com>
Cc: murtech@murphyair.com <murtech@murphyair.com>
Date: Sunday, January 10, 1999 11:59 AM
Subject: rear wing attach brackets

Hello!

My manual (07/27/94) for the Rebel in fig 139 step 449 suggests drilling

two

#30 holes 15/16" apart, 13/16" away from the end bolt hole. If I do this at
these points I get only 1/4" edge clearance. I could either leave them at
this position, space the holes closer (say 11/16" instead of 15/16"), or
drill them further away from the bolt hole (say 1" away instead of 13/16").

Will these holes be left at #30 for 1/8" rivets or are they to be enlarged
to #11 (as indicated in step 463?)?

Happy travels,
Dan
R280

Received: from [206.40.137.199] by woodinville.netos.com
(Post.Office MTA v3.1.2 release (PO205-101c)
ID# 0-38159U2500L250S0) with ESMTP id AAA53
for <murphy-rebel@dcsol.com>; Thu, 14 Jan 1999 08:00:39 -0800
X-Mailer: Microsoft Outlook Express Macintosh Edition - 4.5 (0410)
Date: Thu, 14 Jan 1999 08:00:34 -0800
Subject: Re: rear wing attach brackets
From: "Dan Morehouse" <dan.morehouse@netos.com>
To: "(Murphy Rebel)" <murphy-rebel@dcsol.com>
Mime-version: 1.0
X-Priority: 3
Content-type: text/plain; charset="US-ASCII"
Content-transfer-encoding: 7bit
Message-ID: <19990114160038746.AAA53@[206.40.137.199]>

You betcha Lonnie.

Cheers,
Dan

----------

From: "Lonnie Benson" <lonben@erols.com>
To: "Murphy Rebel" <murphy-rebel@dcsol.com>
Subject: Re: rear wing attach brackets
Date: Thu, Jan 14, 1999, 4:29 AM

Dan:

I have my two rear wing attachments bolted in place and still have the two
empty #30 holes. I have not as yet discovered any further reference to

them

in my instructions. If you find out what we are supposed to do with them
let me know.

-----Original Message-----
From: Dan Morehouse <dan.morehouse@netos.com>
To: murphy-rebel @dcsol.com <murphy-rebel@dcsol.com>
Cc: murtech@murphyair.com <murtech@murphyair.com>
Date: Sunday, January 10, 1999 11:59 AM
Subject: rear wing attach brackets

Hello!

My manual (07/27/94) for the Rebel in fig 139 step 449 suggests drilling

two

#30 holes 15/16" apart, 13/16" away from the end bolt hole. If I do this

at

these points I get only 1/4" edge clearance. I could either leave them at
this position, space the holes closer (say 11/16" instead of 15/16"), or
drill them further away from the bolt hole (say 1" away instead of

13/16").

Will these holes be left at #30 for 1/8" rivets or are they to be enlarged
to #11 (as indicated in step 463?)?

Happy travels,
Dan
R280

Received: from dialup.voyager.co.nz (ts1p05.net.ashburton.voyager.co.nz
[203.21.25.169]) by host02.net.voyager.co.nz (8.8.8/8.6.12) with ESMTP id
WAA27301 for <murphy-rebel@dcsol.com>; Sun, 17 Jan 1999 22:46:25 +1300
(NZDT)
Message-Id: <199901170946.WAA27301@host02.net.voyager.co.nz>
From: "Alister Yeoman" <yeoman@voyager.co.nz>
To: "Murphy Rebel" <murphy-rebel@dcsol.com>
Subject: Re: rear wing attach brackets
Date: Sun, 17 Jan 1999 22:08:42 +1300
X-MSMail-Priority: Normal
X-Priority: 3
X-Mailer: Microsoft Internet Mail 4.70.1155
MIME-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Hi there,

I asked Murphy about this a while ago, they said they put 1/8" rivets in
them.

Alister Yeoman

----------

From: Lonnie Benson <lonben@erols.com>
To: Murphy Rebel <murphy-rebel@dcsol.com>
Subject: Re: rear wing attach brackets
Date: Friday, January 15, 1999 1:29 AM

Dan:

I have my two rear wing attachments bolted in place and still have the

two

empty #30 holes. I have not as yet discovered any further reference to

them

in my instructions. If you find out what we are supposed to do with them
let me know.

-----Original Message-----
From: Dan Morehouse <dan.morehouse@netos.com>
To: murphy-rebel @dcsol.com <murphy-rebel@dcsol.com>
Cc: murtech@murphyair.com <murtech@murphyair.com>
Date: Sunday, January 10, 1999 11:59 AM
Subject: rear wing attach brackets

Hello!

My manual (07/27/94) for the Rebel in fig 139 step 449 suggests drilling

two

#30 holes 15/16" apart, 13/16" away from the end bolt hole. If I do this

at

these points I get only 1/4" edge clearance. I could either leave them

at

this position, space the holes closer (say 11/16" instead of 15/16"), or
drill them further away from the bolt hole (say 1" away instead of

13/16").

Will these holes be left at #30 for 1/8" rivets or are they to be

enlarged

to #11 (as indicated in step 463?)?

Happy travels,
Dan
R280